First time tren

[Ridethelightningbarefoot]

I hear tren is extremely sensitive to heat. What do you recommend to get it to go into solution. I have heard some people say they let it sit over night. I have tren ace and only benzyl benzoate for a solvent.

 

[Nilatac]

Let it sit overnight in bb and use low heat to dissolve what is left
Around 50°C and stirr

 

[Poseidon2022]

Melting point for Trenbolone Acetate is 90-92 Celsius. BB is disolving not melting.

 

[Ridethelightningbarefoot]

Melting point for Trenbolone Acetate is 90-92 Celsius. BB is disolving not melting.

Yes but does it damage the hormone?

 

[Poseidon2022]

No, it will damage if you go higher. It will affect the concentration of your compound. Thats why you need magnetic stirrer with hot plate and temperature control.

 

[Ridethelightningbarefoot]

No, it will damage if you go higher. It will affect the concentration of your compound. Thats why you need magnetic stirrer with hot plate and temperature control.

Why do so many people treat it with kid gloves? Thats almost as high as test cyp melting temp

 

[Poseidon2022]

Why do so many people treat it with kid gloves? Thats almost as high as test cyp melting temp

Because they dont know basic chemistry, because they dont have a controled environment to mix de compound, because the Trenbolone raws are expensive.

 

[Ridethelightningbarefoot]

Because they dont know basic chemistry, because they dont have a controled environment to mix de compound, because the Trenbolone raws are expensive.

Welp it is holding but I forgot to get all the water out from cleaning the beakers! So i have a lil bit of water in my brew now...

 

[Poseidon2022]

Welp it is holding but I forgot to get all the water out from cleaning the beakers! So i have a lil bit of water in my brew now...

Just leave it on magnetic stirer for 10 minutes on 100celsiu. After you will have no more water in

 

[Blitz33]

Melting point for Trenbolone Acetate is 90-92 Celsius. BB is disolving not melting.

What if we dont heat that much?

I dont use much heat on my brews, 40-50C top, I let it stir about 2-3 hours then after filter.

But when I inject it everytime lump happening and sometimes hurts like hell.
is this might be problem?

 

[Ridethelightningbarefoot]

Just leave it on magnetic stirer for 10 minutes on 100celsiu. After you will have no more water in

By your advice, this would damage the hormone, correct?

 

[Poseidon2022]

What if we dont heat that much?

I dont use much heat on my brews, 40-50C top, I let it stir about 2-3 hours then after filter.

But when I inject it everytime lump happening and sometimes hurts like hell.
is this might be problem?

So Thats the reason or maybe one of them. But let me explain.
Every compound has a melting point. The benzyl benzoate it will help only to disolve the main substance, not to melt it directly. You can stir it for days, as long it is not reaching the melting point, the active substance is in crystal form, small, but crystalized, and thats the first cause of PIP and lump.
Our bodies cannot absorb cristals, no matter how small they are.

A second cause of pip is when you use to much BB.

My Option is that you need a controled environment, and i mean a magnetic stirer with hot plate, and controled temperature, in order to avoid the burn.

For every chemical compound you will find the melting point. Use it to brew your suspension. If you dont know BA BB ratios, you can ask me.

 

[Poseidon2022]

By your advice, this would damage the hormone, correct?

On 100 celsius the water will boil even is in your compound. You said you have contamines with rest water from your beaker.
Majority of the steroids, have a melting point around 100 celsius.

 

[Blitz33]

So Thats the reason or maybe one of them. But let me explain.
Every compound has a melting point. The benzyl benzoate it will help only to disolve the main substance, not to melt it directly. You can stir it for days, as long it is not reaching the melting point, the active substance is in crystal form, small, but crystalized, and thats the first cause of PIP and lump.
Our bodies cannot absorb cristals, no matter how small they are.

A second cause of pip is when you use to much BB.

My Option is that you need a controled environment, and i mean a magnetic stirer with hot plate, and controled temperature, in order to avoid the burn.

For every chemical compound you will find the melting point. Use it to brew your suspension. If you dont know BA BB ratios, you can ask me.

Thank you so much

These crystals can pass the 0.22 filter?

I m using baskillers calculation 2/18 all of my brews, Mct for easy filtering. and changed bb to merck brand, old one I used very cheap and I suspect it gives me flu like symptoms, I will try again this week.
I got a huge setup now, 6 head manifold filter, big ass autoclave, UVC and etc, Walter White kind of things happening, Benzyl benzoat keeps flowing no matter what

 

[Poseidon2022]

Thank you so much

These crystals can pass the 0.22 filter?

I m using baskillers calculation 2/18 all of my brews, Mct for easy filtering. and changed bb to merck brand, old one I used very cheap and I suspect it gives me flu like symptoms, I will try again this week.
I got a huge setup now, 6 head manifold filter, big ass autoclave, UVC and etc, Walter White kind of things happening, Benzyl benzoat keeps flowing no matter what

Not all hormones need 2/18
It is not abiut thr 0.22 fitler, it s about cristalising in your body because it was not absorbed in a specific time window, and here is about the ester from compound.

That new toys sounds good. Mct is good. I use mig812 in Europe for my clients. In order to have a good result, bb, ba and mct in Pharma grade please.

Good luck

 

[narta]

A second cause of pip is when you use to much BB.

High BB does not cause pip. High BA on the other hand does.

 

[Poseidon2022]

High BB does not cause pip. High BA on the other hand does.

That’s your opinion.
My opinion as chemist is that Benzyl Benzoate creates Pip

 

[Poseidon2022]

High BB does not cause pip. High BA on the other hand does.

Send your brews to the lab for test. Ask them to tell you how much BA do you have in your compound and how much BB after brewing. After that can you tell me that BA cause PIP

 

[Ridethelightningbarefoot]

High BB does not cause pip. High BA on the other hand does.

One time i messed up and added ba instead if bb. So accidently made a brew with about 20% ba. I mean it stung but it wasnt that bad. Idk about bb...i make all my brews with 20%bb and they are ok.

 

[narta]

That’s your opinion.
My opinion as chemist is that Benzyl Benzoate creates Pip

You should definitely send your resume to Bayer cause those fools use 30% BB on Testoviron Depot and 50% BB on Nebido instead of cheap oil.

You could save them ALOT of money.