Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic

[Ninjarello1]

Do you think to add on pastebin near every product the link to jano test?
Could make things easier

 

[Venom Lab]

Do you think this new batch will be higher purity and lower dimer content? 420 IU for 280 euros?

Retatrutide 30 mg for 120 euros or 60 mg for 220 euros, right? What purity and how is it packaged?

I don't like to guess on these things, I'll test it and then we will all see how these new batch is.

I dont sell HGH that is not labtested.

The reta is packaged as single vials as any peptides Plenty of feedback on this thread about my reta. I use it myself.

 

[Venom Lab]

Do you think to add on pastebin near every product the link to jano test?
Could make things easier

I'll see how I can make it possible without cluttering the pastebin excessively or I'll make another pastebin with all the labtest.

 

[Venom Lab]

Could you please share the dosage and price on these three (clomid, nolva and aromasin) such that I could put in a preorder for them? I couldn’t find them in the pastebin.

Thank you!

Clomid 50mg
Aromasin 25mg
Nolva 20mg

Prices should be:
30€ 30x 25mg aromasin
20€ 30x 50mg clomid
20€ 30x 20mg nolvadex

But those are not final, you need to give me a small break guys, I have closed exactly because I need time to revamp the pricelist calculate prices, test products etc.

There is no rush for a preorder of pills, you can easily do it first week of January.

Preorder matters for oils mostly, it takes not much to pack some pills, brewing takes time.

 

[Kalinser]

Ladies and gentlemen good evening. I'll start my intro with a simple premise -- this will not be your typical steroid source you are used to seeing around. I'm not special in anyway and I'm not saying I'm better or anything like that. The point of my statement is that I am and I will always be a small boutique shop.



I want to cater to those individuals that are in need of a customized service and are interested first of all in the quality of the product produced, instead of the cheapest thing they can find in order to hoard and/or flip it for a quick buck.



For this specific reason, I have quite a few limitations that will not make my life easier around here but we will see how it goes I guess.



Let's start with the two things I care the most about: quality of products and the security of my operation and clients.

Brewing process:​

I work on a steel tabletop that gets regularly cleaned with an ISO 70℅ solution, the table is placed in a dedicated room used only for brewing.



All beakers get regularly cleaned and depyrogenated with dry heat sterilization in an oven dedicated only to this process; 2 hours at 170c.



Filtration: very simple, very effective quite slow. I use only sterile single packaged welded PP syringe filters PTFE 0.22um 30mm. No possible leeching problem, no contamination and unsterile issue, everything is done in front of a flow hood that it's not needed as I'm using a closed sterile system that never get in contacts with any open air but I don't see why not using it as I have it.



The vials used are pre-sterilized ALK vials with FluroTec stoppers.



Since my current flow hood is not big enough for my liking at the moment, I have a 1200x800mm flowhood with H14 hepa filters inbound. This will create an environment big enough that I am comfortable in recapping the vials (if customers care so much about it) and provide the aesthetic of a capped vial.



Each batch of raws in my possession has been HPLC tested for purity. I don't brew anything that doesn't have a labtest for the raw.



All my carrier oils and solvents are of pharmaceutical grade quality.
No exceptions.

No Guiacol in any of my products.

EO is used only under request of clients if not requested I don't use it for any of my usual products.



Carriers oils I brew with are:


Miglyol 812N (MCT)

Castor

GSO (only if requested)

Sesame (only if requested)

Mig840 (only if requested)

EO (only if requested)



All vials are filled manually directly while sterile filtering the oil, for this exact reason you can receive some vials that are with different fill, you will see yourself that no vials have LESS than 10.5ml inside but most of them have 11-11.5ml in it. You are paying for 10ml and you will always get more.

Orals:​

I don't plan to ever acquire a pill press, orals offered will be in limited quantity and outsourced, anything offered will be previously labtested to assure the quality of the product.
I'll produce orals in suspension in the near future using the lab tested raws in my possession.

Security:​

I accept emails only from protonmail accounts. Any other domain used will be ignored and the mail deleted.


I don't provide tracking unless there is an issue with the shipment.


All client information is completely deleted after 2 weeks, or earlier if requested by the client. If reception of package is confirmed and the customer doesn't have any issues, the emails and client information will be wiped immediately upon confirmation.



Everything runs on an encrypted laptop and encrypted phone, behind a no log VPN. I run my own XMR and BTC node.

Only cryptocurrencies are accepted.

Preferred crypto is XMR anyone using it will receive a 5℅ discount.

BTC accepted as well.

Anyone not familiar with XMR can easily convert any crypto into XMR using trocador.app website.



XMR is paramount for your own security and my security so I will really appreciate anyone that will take the time to use it and I'll make it worth it for you

Stock and labtest:​

I don't keep stock of my products, I brew everything ad-hoc after I receive an order, the maximum overhead I do sometime is if I get for example a 5x Y substance order I will brew 10-15x vials instead and I'll be left with few vials to use for myself or for my local clients. For this specific reason I can't provide labtest of my batches, as there are no big batches being brewed.


So I would be a liar if I were to show you a lab test of X batch and let you believe that is what you are getting, as that would represent probably just a limited numbers of vials or whatever was the current order I was working on.

That's why I don't brew anything that I don't have the raw purity, because after having that information the only reason to not brew the labeled dosage would be an inability to do simple math / very big human error or me being a piece of shit and underdosing on purpose.

In order to offer some peace of mind to any of my clients, I offer store credit for any blind labtest done.

This policy will be adjusted in case of any abuse or bad actors trying to take advantage of it.

Shipping:​

only EU domestic, UK only under specific rules, Scandinavian countries excluded until I have my stealth ready to go.
Any packages lost or seized will be reshipped once.

I do not take responsibility if you are unable to write your address properly resulting in the courier unable to deliver the package.

Delivery around Europe takes on average 4/5 days.

Customisation:​

I allow my customers to decide what carrier oil will be used for their oils, I don't allow however to do different carrier oil for the same substance ordered unless more than 5+ vials are requested.

Meaning you can't order 2 vials of MCT test D and 3 vials of test D in GSO. It's one, or the other, unless you are lucky and I have some leftover vials from my personal stash or from a previous order. If you ask beforehand, I'll try to accommodate your request as much as possible.

For this reason I ask you to have a bit of patience when ordering multiple substances as brewing 1 vials or 10 vials of the same substance takes almost the same time but brewing 10 vials of 10 different substances is a very time consuming process.

I don't do bulk orders, I'm not here to fuel your stocks so you can resell locally. Don't ask for 100x vials of X substance or anything close to that.
Maximum quantity of each substance is capped at 10 vials (raw stock permitting)

At anytime I feel overwhelmed or unable to process the orders in a timely manner I'll pause the shop and refund all the pending orders.

I'll always keep you updated on my current stock of raws so you will know in advance the situation and plan accordingly.

Just to be clear any trolling, stupid flame or nonsense questions will be straight ignored and you will just be placed on ignore and barred from any business.

I'm here to offer something unique but I'm not here because I need this, I don't need your business, understand this very clearly, don't come to beg or haggle on prices.
The discounts you can get are clearly explained in the pricelist.

I'm a reasonable person however and value a lot more a longer business relationship then just a quick bucks to be made.
Who has ever done business with me knows I like to keep my recurrent clients happy and surprise them with some nice treats here and there.

You can be sure that if at any point I am no longer happily doing this, I can easily refund any of my customers and just say good luck, and good bye.

Enjoy the feet pic and please read the price list properly. If you have any questions please do not hesitate to ask.

Venom




View attachment 356473

Hello venom, do you ship to Georgia? Caucasian region. Also what is shipping price and do you offer reship?
Georgia is pretty safe country tbh, I do not hear anyones things getting seized so I guess it should be ok.

Let me know, I m very interested

 

[Venom Lab]

Hello venom, do you ship to Georgia? Caucasian region. Also what is shipping price and do you offer reship?
Georgia is pretty safe country tbh, I do not hear anyones things getting seized so I guess it should be ok.

Let me know, I m very interested

At the present moment I'm only shipping EU domestic. Sorry to not have a better answer for you.

 

[Kalinser]

At the present moment I'm only shipping EU domestic. Sorry to not have a better answer for you.

Thanks for answer then
From which country do you ship your packages?
I plan to use a carriage company, so I’d like to know which origin country would result in faster shipping.

 

[Venom Lab]

Thanks for answer then
From which country do you ship your packages?
I plan to use a carriage company, so I’d like to know which origin country would result in faster shipping.

For amy enquire about shipping etc please send me an email at my info email, you can find it in my pricelist on the first page of this thread. Thank you

 

[Venom Lab]

I want to address one thing before reopening, as you can see from the pricelist I have deleted the bulk discount on my oils for 10+ products of the same kind.

The reason is simple, I believe the quality of my products should receive the proper value for the work and energy I put into it.
I won't ever compromise in anyway about what I produce and I have and always will be crystal clear about anything that is brewed and sold from my lab.

For this exact same reason I don't see why I should do a race to the bottom on prices trying to compete with other labs that in my opinion are on a different level of me.

If 5/10€ difference is a problem for you, I'm just not the correct lab to buy from. It's fine and I have no problem with that.

We can haggle with prices on peptides and GH anyday at anytime but I'll not do that with my oils.

Everyone has a different view on what is worth X and how much value you give to the different variables involved in the production of injectable, I accept that and respect it, so whatever works for you guys but I stand where I'm and I won't budge.

Happy Christmas to you all and wish you a great times with your loved ones.

I'll be offline for few days and maybe check email and forum max once or twice a day.

Stay safe and be happy