Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic

So I'm not an expert but from my experience there are two wrong assumptions that you are making.

First one: the belief that carrier oil influence the metabolization of a substance so much to make a big difference. It doesn't. A substance in full castor oil may have a delayed absorption of maybe few hours.
A mix of castor and MCT will have a even less meaningful impact.

The reason for mixing carrier oils is not to extend half-life or delay onset is for the properties of some carrier oils have, like decreasing inflammation, a slightly painkiller effect, antimicrobial etc. Changing the viscosity of the oil as well.

I have found that thinning the oil too much make it yes easier to inject with slinpin but it's very easy for leaking subq and those become nasty very quick.

Second wrong assumption: thinking that the more stable the levels of an hormone the better you will feel. This is a paradox but if you do limit the side with stable levels you at the same time limit all those "positive sides" like raging libido.

If you have cycled for a while you will notice that usually you have an increased libido at the Start of a cycle and then it plateau around mid cycle and continue to slowly decrease or stay stay the same the longer you go.

This is because the body adapts to the level of hormones and it becomes the new baseline for that time.

Prop gives you stronger libido erection etc exactly because you have continuous peak and valleys. If you try to extend the half-life making it more stable you will defeat exactly that precise effect it gives you.

Of course with more pronounced peak and valley there can be more sides but Because chemically speaking sides are not just the "bad" one, sides is to whole plethora of effects a substance gives you some are considers positive and some negative.

These are my 2cents and not the universal truth
Thank you for the explanation and for responding!
 
@Venom Lab

It’s great to see you take time to answer questions from your perspective!

I was looking at your Reta in the list. Was it tested by you or any client? I’m thinking about adding Reta to my TRT routine, been on Tirze (official) but it totally my appetite
I tried driada Reta, Dutch labs Reta and I never had appetite suppression even at 10mg weekly
Meanwhile venom Reta gave me that effect at only 4mg , maybe is cause is higher purity?
 
Got my order today of venom
Inject yk11
Inject anadrol
Inject dbol
Test d500 which I already had used from him.

As always perfect stealthy packaging.
It took almost 2 weeks to deliver but that is because of the Christmas gift shopping that everybody does now.

Will def try these things during the holidays. Especially curious about the yk11.
For those who have use it. What would be a good dose to start 20mg?
 
Got my order today of venom
Inject yk11
Inject anadrol
Inject dbol
Test d500 which I already had used from him.

As always perfect stealthy packaging.
It took almost 2 weeks to deliver but that is because of the Christmas gift shopping that everybody does now.

Will def try these things during the holidays. Especially curious about the yk11.
For those who have use it. What would be a good dose to start 20mg?
I am going to have my first injection of YK-11 today preworkout. Will go with 15mg.
Those already using it, do you inject it daily or on workout days only?
 
We NEED some more injectable YK11 logs.

It seems to be one of the greatest Injectable version of oral AAS if you go off of recent reports, especially when you consider the sides you avoid (mostly digestive stress) by doing it as an inject instead of orally.
 
So situation on TREST E:
Bad, very bad.

Attached on the bottom you will find purity of raw, GCMS on raw, lab test of a small batch brewed, GCMS on the small batch.

Summary:

The bad:
Purity is 34%, yes it's not a typo, 34%.
It can't be brewed with a target mg/ml because as you can see from the batch test it came out 120+ mg/ml but I shot for 200mg/ml and I did correct for purity and I believe you can trust me when I say I didn't fuck up the brewing part.

I had an intensive exchange of email with Jano, no idea why it's coming out like this but that's the situation.

The good if we can call it good: GCMS doesn't show harmful substances, it's mostly impurities from the synthesis gone wrong so inactive hormones probably but nothing that comes out straight as toxic.

The possible plan: I'll brew it all of it in one batch, I'll send it to Jano to see what's the actual concentration (as it looks like we can't trust any normal calculation like other standard raw). See what MG/ML is the batch and sell it at a real discounted price.

The other plan: I throw it in the garbage bin and that's it.

I have laid out all the info for you guys, I know many of you where eager to get trestolone E so I still give you a chance to have it but I want you to make an informed choice, if you choice is no thank you I'll pass (completely understandable) let me know so I'll just throw it away and not waste money and time brewing and sending it to test the finished batch.
 

Attachments

So situation on TREST E:
Bad, very bad.

Attached on the bottom you will find purity of raw, GCMS on raw, lab test of a small batch brewed, GCMS on the small batch.

Summary:

The bad:
Purity is 34%, yes it's not a typo, 34%.
It can't be brewed with a target mg/ml because as you can see from the batch test it came out 120+ mg/ml but I shot for 200mg/ml and I did correct for purity and I believe you can trust me when I say I didn't fuck up the brewing part.

I had an intensive exchange of email with Jano, no idea why it's coming out like this but that's the situation.

The good if we can call it good: GCMS doesn't show harmful substances, it's mostly impurities from the synthesis gone wrong so inactive hormones probably but nothing that comes out straight as toxic.

The possible plan: I'll brew it all of it in one batch, I'll send it to Jano to see what's the actual concentration (as it looks like we can't trust any normal calculation like other standard raw). See what MG/ML is the batch and sell it at a real discounted price.

The other plan: I throw it in the garbage bin and that's it.

I have laid out all the info for you guys, I know many of you where eager to get trestolone E so I still give you a chance to have it but I want you to make an informed choice, if you choice is no thank you I'll pass (completely understandable) let me know so I'll just throw it away and not waste money and time brewing and sending it to test the finished batch.
can you share the hplc link and gcms link in oil + which oil is used? im sure an 34% oil test will help @Photon's model
 
can you share the hplc link and gcms link in oil + which oil is used? im sure an 34% oil test will help @Photon's model
Cant share the link as I got only the PDF it was a gift from @janoshik it's not attached directly to the labtest results.

Oil used is Mig812 from Fagron pharmaceutical

I wanna thank @janoshik
For all the personal time he dedicated me and the patience he had to answer all my questions plus the 2 GCMS he ran on the two samples. Thank you Peter!
 
Cant share the link as I got only the PDF it was a gift from @janoshik it's not attached directly to the labtest results.

Oil used is Mig812 from Fagron pharmaceutical

I wanna thank @janoshik
For all the personal time he dedicated me and the patience he had to answer all my questions plus the 2 GCMS he ran on the two samples. Thank you Peter!
no worries its good enough. dont know if he can use mig812

sorry for you had to recieve this shit raws i would demand a refund. hope you get money back
 
no worries its good enough. dont know if he can use mig812

sorry for you had to recieve this shit raws i would demand a refund. hope you get money back
One source decided to work with me not a full refund but a compensation plan that force me to buy more raw to access it (nothing to offset completely the cost of the 50gr of this shit I bought that for your information was well over 3600$)
The other sources laughed in my face and said Janoshik can't test properly and told me to eat a dick

Mig812 is basically MCT so I bet he can use it
:)

I didn't post the other source purity test because I bought only 10gr of it to test the source and I throw it away as I didn't run any GCMS on it and as it was so low purity it wasn't worth wasting time and more money on a mere 10gr.
 
So situation on TREST E:
Bad, very bad.

Attached on the bottom you will find purity of raw, GCMS on raw, lab test of a small batch brewed, GCMS on the small batch.

Summary:

The bad:
Purity is 34%, yes it's not a typo, 34%.
It can't be brewed with a target mg/ml because as you can see from the batch test it came out 120+ mg/ml but I shot for 200mg/ml and I did correct for purity and I believe you can trust me when I say I didn't fuck up the brewing part.

I had an intensive exchange of email with Jano, no idea why it's coming out like this but that's the situation.

The good if we can call it good: GCMS doesn't show harmful substances, it's mostly impurities from the synthesis gone wrong so inactive hormones probably but nothing that comes out straight as toxic.

The possible plan: I'll brew it all of it in one batch, I'll send it to Jano to see what's the actual concentration (as it looks like we can't trust any normal calculation like other standard raw). See what MG/ML is the batch and sell it at a real discounted price.

The other plan: I throw it in the garbage bin and that's it.

I have laid out all the info for you guys, I know many of you where eager to get trestolone E so I still give you a chance to have it but I want you to make an informed choice, if you choice is no thank you I'll pass (completely understandable) let me know so I'll just throw it away and not waste money and time brewing and sending it to test the finished batch.
One thing I forgot to say, the GCMS AUTOID identified the trestolone as drostolanone so just ignore the name on the GCMS
 
Back
Top