Union Labs – Free 2-3 Day USA Shipping

[hellerhiwater]

absolutely insane to name drop another thread to try and scrape some clout off them.

but if you were to model another source's methods....you could definitely do worse than who you mentioned above.

do the lab, sterility, finished products, etc photos with the crumpled paper with Meso, today's date, and ur name.

also some unique boobies bc im a perv

 

[Veinyone]

Machine fills the air in the room with Hydrogen Peroxide disinfecting the air and surfaces while cleaning and working. Room is thoroughly vacuumed, mopped all surfaces wiped down with cleaning solution. Work bench cleaned with alcohol. Glassware is cleaned with soap and water. Rinsed with distilled water then pressure cooked with distilled water. The beaker is put on the hot plate. Mig 812 is added to the beaker. Powder is added after the oil heats. Once mixed the USP Benzyl Benzoate is added. Then Benzyl Alcohol is added. When mixed properly and heated to an appropriate temperature then sterile vials are are decrimped with a Wheaton W225353 EZ-Decapper. and filled from the side of the stopper after the liquid is filtered through an individually packaged sterile syringe filter on an individually packaged sterile syringe. (0.22μm 25mm Hydrophobic PTFE for Mig 812 and 0.22μm 33mm Hydrophilic PES for L-Carnitine) I have thought about switching to another method. Just taking the plastic top off, keeping the exiting crimp that was tested and proved to be sterile. Filling the vial through the center of the stopper. Wiping with alcohol and placing a sterile security seal.

Sterile Barrier Vial Seals, Tamper Indicating Seal, 20mm, Silver, 20 Seals

Sterile Barrier Vial Seals, Tamper Indicating Seal, 20mm, Silver. Allows you to safely travel with your insulin or other type vials. Stores 2 Glass Serum Vials. Up to 12 hours of cooling time.

www.medical-and-lab-supplies.com

Please let me know your thoughts and suggestions for improvement.

Large volumetric flasks to maintain dosing accuracy, autoclave for glassware sterilization, flow hood over filling area, always wear a hair net, gloves, mask… Just a few things I can think of off the top of top of my head that would put people at more ease.

 

[Union Labs]

absolutely insane to name drop another thread to try and scrape some clout off them.

but if you were to model another source's methods....you could definitely do worse than who you mentioned above.

do the lab, sterility, finished products, etc photos with the crumpled paper with Meso, today's date, and ur name.

also some unique boobies bc im a perv

I'm sorry. It wasn't my intention to scrape clout. It was to give credit for learning from how they do things. We've all sat here for years and gone through the forums and asked questions and learned from each other. The high quality memebers here are what seperates MESO from the other boards. I will post the photos I just have to eat first I'm starving. the only thing thats keeping me anti-catabolic right now is the tren ace shot from this morning.

 

[craigdt]

Its nearly identical to sp5ders process.

Wuuuuuuutttttttt

I haven't seen this strategy before.

Itsaboldmovecotton.gif

First, no tits, then this?

Need to do some damage control here.

 

[nobu156]

Its shit from my personal stash because I have so few products to offer without it (Brewed batches of 35ml L-Carnitine 600mg/ml and 12ml NPP Mig812 100mg/ml so far. I just wanted to make it worthwhile for someone to place an order as oppose to another vendor with a full lineup. Which vendor each product came from is labeled. These vendors all have their own threads on this forum and we all have seen test data of their shit and some of us buy it and some of us don't. I'm simply offering it at low prices to clear funds and space to expand the lineup for you all. Give me a few minutes and I'll post the jug of Mig 812 I cracked.

Do you have anything else in the pipeline? Tbh, I might have bought some of the Chinese shit depending on what you had. Price on the l carnitine is attractive.

 

[hellerhiwater]

I'm sorry. It wasn't my intention to scrape clout. It was to give credit for learning from how they do things.

If that’s sincere, fair enough. But imo the best way to go about that is to just post/explain how you’re doing it and people can come to their own conclusions and then if anyone asks/infers you could confirm or attribute it to the vendor.

Food is necessary for life, gotta eat. But you’re talking like you’ve been around the forums a while. If that’s true, why would you start a vendor thread without all the of the stuff ready to go and included in your first few posts?

 

[Union Labs]

Do you have anything else in the pipeline? Tbh, I might have bought some of the Chinese shit depending on what you had. Price on the l carnitine is attractive.

Every dollar I have saved and the proceeds from every sale I am so fortunate to receive from this community will go toward developing a full lineup of oils in 812 and better equipment. Please shoot me an email and I'll tell you what's in my chinese stash. Please let me know what you'd like to see first in 812? Test E? Test C? EQ? Mast E?

 

[Union Labs]

If that’s sincere, fair enough. But imo the best way to go about that is to just post/explain how you’re doing it and people can come to their own conclusions and then if anyone asks/infers you could confirm or attribute it to the vendor.

Food is necessary for life, gotta eat. But you’re talking like you’ve been around the forums a while. If that’s true, why would you start a vendor thread without all the of the stuff ready to go and included in your first few posts?

Your absolutely right. I should have looked at some of our other really great US domestic vendors introductions and prepared a better introduction as they had. Buying all the materisal and equipment, setting it all up. Waiting forever for raws to arrive, shipping everything to Jano and waiting for the results takes forever. When I got the results back I was just so excited to finally be able to contribute to this community and interact with the people that I have learned so much from that I didn't prepare myself properly. I apologize for that and promise to do better moving forward.

Can anybody tell me where to go to pay some chick to write Union on her tits and take a photo?

 

[osqe]

Why set the bar for t/a so high when the order minimum for free shipping is $40?
Let's say you become a popular seller. There is no way in hell you will be able to respond to emails, ship, and package a ton of no minimum orders while focusing on quality brewing without child labor or wanting to blow your head off.
Idgaf if my package hits all other 49 states before arriving to mine if the source is on top of their testing and is transparent. There are sources with amazing t/a I wouldn't even recommend to my enemy.
Focus on what matters. Using t/a as a selling point isn't as attractive as you may think, imo.

 

[osqe]

Can anybody tell me where to go to pay some chick to write Union on her tits and take a photo?

I know a person for this purchase
@craigdt

 

[crispybacon!]

False start. 5-yard penalty. Repeat first down.

 

[Andrewthatguy]

absolutely insane to name drop another thread to try and scrape some clout off them.

but if you were to model another source's methods....you could definitely do worse than who you mentioned above.

do the lab, sterility, finished products, etc photos with the crumpled paper with Meso, today's date, and ur name.

also some unique boobies bc im a perv

Preferably big tits.

 

[Union Labs]

Wuuuuuuutttttttt

I haven't seen this strategy before.

Itsaboldmovecotton.gif

First, no tits, then this?

Need to do some damage control here.

I'd like to ask for your help with providing our good friends on this forum with some patriotic tits. Can you please DM me. I cant initiate them.

 

[delay3s]

Every dollar I have saved and the proceeds from every sale I am so fortunate to receive from this community will go toward developing a full lineup of oils in 812 and better equipment. Please shoot me an email and I'll tell you what's in my chinese stash. Please let me know what you'd like to see first in 812? Test E? Test C? EQ? Mast E?

do you have any ancillaries from india/china? If you have them on hand domestic im betting you could sell they could sell quick to get you up and running with your products

 

[Union Labs]

Why set the bar for t/a so high when the order minimum for free shipping is $40?
Let's say you become a popular seller. There is no way in hell you will be able to respond to emails, ship, and package a ton of no minimum orders while focusing on quality brewing without child labor or wanting to blow your head off.
Idgaf if my package hits all other 49 states before arriving to mine if the source is on top of their testing and is transparent. There are sources with amazing t/a I wouldn't even recommend to my enemy.
Focus on what matters. Using t/a as a selling point isn't as attractive as you may think, imo.

Thank you for giving me good advice. I'm starting to experience what you are telling me without having even made a single sale. For hours all I've been doing is answering emails and repling to posts and have gotten nothing accomplished. But it is my own fault for providing this community with a poor introduction post. I will take that to heart. Focus on what maters most to our community. Testing and Transparacy.

 

[Union Labs]

do you have any ancillaries from india/china? If you have them on hand domestic im betting you could sell they could sell quick to get you up and running with your products

I do but I was advised to focus on brewing with high quality equipment and material and Lab Testing so my offering is not confusing. And I get that. Its confusing to sell untested Indian and Chinese shit at the same time your telling everyone about your raw tested, finish tested Mig 812 Oils.

 

[Union Labs]

I'm sorry I didn't post the lab photos yet. I will post lhem tomorrow. I'm sorry. It got late early. I want to thank everyone for their input and for holding me accountable for the mistakes I've made. It's the only way for me to learn and improve.