I have some primo E, Mast E and Tren E raws you can use for samples to test out.Hey everyone,
I wanted to formally launch a new project I’ve been working on and invite the community to be part of it.
This is “Project: Save Your RAWs.”
The mission? To clean up the underground raw powder market... one batch at a time.
Too many people are working with 70–88% purity raws, and it’s causing pain, inflammation, pip, and inaccurate dosing across the board. Recrystallization can easily take that garbage and turn it into something smooth, clean, and pharma-tier.
What I’m Offering:
I’m now opening up a charity-based purification service. Not a business. Not a hustle. I’m doing this to help the scene and raise the standard we all deserve.
If you send in raws to be purified, I’ll recrystallize it for you and send it back, clean and ready.
If it's a compound I don’t already have, all I ask is for 2 grams off the top — that’s it. That sample will go into a collection I'm building for reference standards when I eventually launch my own testing lab in the later future
If it’s a compound I already have, there’s just a small service fee depending on the batch size to cover time, filters, and solvents. Nothing crazy. It also will be dependent on the amount your needing done. Small amounts = small fee
What I Already Have:
Trenbolone Acetate (Tren Ace)
Testosterone Undecanoate (Test U)
Testosterone Enanthate (Test E)
Testosterone Cypionate (Test C)
Testosterone Propionate (Test P)
Mast P
What I’m Still Looking For (aka—what I’ll purify for almost free): with small fee
Boldenone (EQ, Base or Undecylenate)
Masteron (Drostanolone) Enanthate
Primobolan (Methenolone) Enanthate / Acetate
Nandrolone Decanoate / Phenylpropionate
Trenbolone Enanthate
1-Testosterone / 1-Test Cyp
Methylated orals (Anadrol, Anavar, Dianabol, Superdrol, Halotestin)
DHT derivatives like Mesterolone (Proviron), Mestanolone
Any lesser-known designer compounds or esters
If you’ve got something exotic or old-school, I really want to talk to you. This project isn’t just about helping people purify their raws.... it’s about building a verified reference archive of as many compounds as possible. Clean samples. Verified esters. Proper morphology.
The more samples I have the better my testing service will be later on. And you get to have nice clean raws. You can send it off to jano just for fun and know YOU got good stuff or better than you had
MESO-Rx
Anabolic Steroids
Save your unusable raws Guaranteed.
- Thread starter TheScholarOfBrew
- Start date
TheScholarOfBrew
Banned
TheScholarOfBrew
Banned
View: https://drive.google.com/file/d/17ie0TOTKmVfmyOq5yzfXaknVr-4WDTX8/view?usp=drivesdk
If you don't want to read all this, you can run it through AI for a summary
Photon
Member
I believe you ordered the same batch as I did.
Did you send it for testing after you got it refunded (based off the fact it was the same batch)?
What you received did not look like what i received.
TheScholarOfBrew
Banned
I didn’t send it for testing yet. I still plan to, but right now I’m heavily focused on research, especially recrystallization.
At this point, I'm confident that with a proper one- or two-pass recrystallization, even uncertain raws can be purified well enough for personal use.... assuming correct crystal formation verified against known polymorphic patterns from XRPD studies.
And yes, my raws looked different than yours. Rather, unfortunate for what you received..... Mine were clumpy but visibly much whiter. I've been dehydrating them using activated molecular sieves. Which is 5x as strong as silicon gel packs.
Right now, I'm purifying everything using methods based directly on the testosterone undecanoate crystallization procedures from published patents.
If you trashed your batch or still have it, I can show you exactly how to recover it. Or if you want, you can send it to me and I’ll recrystallize it properly and send it back clean. Your welcome to test it again or just use it as is. Though at that percentage you recieved you won't be getting back a lot lol...... Still better than nothing though.
TheScholarOfBrew
Banned
Just a heads-up for anyone attempting this process: I've already run it multiple times and I’m about to scale it up again....... this time for a much larger batch. It’s part of a project I’m doing in collaboration with one of the biggest UGL suppliers in the U.S.
Honestly, I’m still wrapping my head around the fact that they trust me to handle this much responsibility, but I’m going to make sure everything I do reflects that trust. Quality first, always!!
Unfortunately, I am unable to name drop.
Trust me I wish I could for brag right....
And for those curious: yes, grinding the crystals right after recrystallization is a legit move. It’s not just about homogenization.. at that point, you’ve got large, dense crystals that may still be holding on to surface-bound solvent or even light inclusions. Breaking them up before the final drying step helps open those sites up and allows the vac-dry to actually finish the job properly.
You don’t skip steps if you're serious about purity. This is just how it's done when you’re aiming to deliver something real.
Honestly, I’m still wrapping my head around the fact that they trust me to handle this much responsibility, but I’m going to make sure everything I do reflects that trust. Quality first, always!!
Unfortunately, I am unable to name drop.
Trust me I wish I could for brag right....
And for those curious: yes, grinding the crystals right after recrystallization is a legit move. It’s not just about homogenization.. at that point, you’ve got large, dense crystals that may still be holding on to surface-bound solvent or even light inclusions. Breaking them up before the final drying step helps open those sites up and allows the vac-dry to actually finish the job properly.
You don’t skip steps if you're serious about purity. This is just how it's done when you’re aiming to deliver something real.
Last edited:
knucklesamich
Member
I wish I'd kept some of the Test E I had. I threw a shit ton of it away, as it had melted and also hurt like hell (crazy pip). I could have sent it to ya possibly, and send half back, you keep the rest. It was well before I saw this topic.
No chemistry background, so I can't contribute there, but it's fascinating.
No chemistry background, so I can't contribute there, but it's fascinating.
TheScholarOfBrew
Banned
NP man I got plenty of test E to purify ATM. A lot of work load ahead.... But I do appreciate it! If you do ever get something absolutely horrible don't hesitate to DM me or reach out. I'll help. All I ask is you get it tested before and after and show it on meso. Helps a lot.
The problem with this method is that you wont separate oxidized, degraded or by products since they are similar in solubility to the hormone yourbare trying to seprate. This is in general.
You want very pure product? Perform column chromatography. You have to have a high purity sample to compare and find the fraction in which the desired hormone is. It’s very time consuming though but it will give a very pure product out of experience( not steroids)
You want very pure product? Perform column chromatography. You have to have a high purity sample to compare and find the fraction in which the desired hormone is. It’s very time consuming though but it will give a very pure product out of experience( not steroids)
TheScholarOfBrew
Banned
Technically speaking tren ace can be separated from its degraded by products. But yes I already have invested into a hplc machine and a few other needed things to repair it and get it ready for use. I'm just thankful it comes with the user manual still.
@TheScholarOfBrew Hello, sir i tryied to massage you but it isnt working for some reason, do you by any chance offer consultations? Thank you!
final_prayer
New Member
Bumping up a very interesting thread.
final_prayer
New Member
Hey Bro, if possible send me an IM here ..may be worth having a quick conversation
TheScholarOfBrew
Banned
I'm not going to directly say that Jano endorses me, but he did give me his best wishes.
And that's more than I can ask for.
And that's more than I can ask for.
Hi, very exciting. Is it possible to contact you direct regarding this topic? To exchange experiances etc. Just send me a DM.
All best
MadaFacor
Member
Fu
Funny shit. I asked a large language model with the chances are that this was not written almost exclusively by a large language model. 80% chance. Then it literally askes me if I wanted to roast him or create a meme...WTF. I wasn't even talking shit I just asked it if it was all AI generated. This tech is crazy.
Attachments
HeatherSwanson
Member
What a time to be alive
Great thread. Grateful we can leverage @Walter Hype 's incredible amount of work here to improve UG tren quality. Glad you could come back and contribute again Walter.
Thank you @MESO-Rx Administrator. I appreciate it.
Thank you @MESO-Rx Administrator. I appreciate it.
BamaCrazy
Banned
lol. That MF was recently accused of scamming some of his customers. And it was not the first time. Who let that retard back on to the forum?
Similar threads
