Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Sampei]

I am upset because it was leaking big dog. I dont run a business or resell. When you get a problem that is not resolved, you too can eat dog shit alone. If it leaks its not cosmetic. I posted because i identified an issue. If you dont like what i post you are also free to bitch about it in the forums.

You resell, you even said it in another post or you hinted to it. I remember you buying shit load of gear and you don't buy that much unless you are reselling.

You are ok on reporting the issue but don't whine like a bitch.

 

[SYNTAX_ERA]

You resell, you even said it in another post or you hinted to it. I remember you buying shit load of gear and you don't buy that much unless you are reselling.

You are ok on reporting the issue but don't whine like a bitch.

I have a subscriber tag because when i joined the forum i off loaded stuff i couldnt use due to carrier oil. I asked Millard to remove my subscriber tag but he said i would have to create a new account. I decided not to do this so i can be as transparent as possible. I dont like the tag but thats life. I reported the issue and one of the reps are notifying the production department.

 

[narta]

I am upset because it was leaking big dog. I dont run a business or resell. When you get a problem that is not resolved, you too can eat dog shit alone. If it leaks its not cosmetic. I posted because i identified an issue. If you dont like what i post you are also free to bitch about it in the forums.

No it's not leaking. I have crimped my fair share of vials with worse crimping jobs than that and nothing leaked. In order to leak you need the stopper to be loose and that thing is not loose. It's a cosmetic issue that is effecting sales.

You can deny it as much as you want.

 

[Sampei]

No it's not leaking. I have crimped my fair share of vials with worse crimping jobs than that and nothing leaked. In order to leak you need the stopper to be loose and that thing is not loose. It's a cosmetic issue that is effecting sales.

You can deny it as much as you want.

Narta I have seen a vial leaking with a crimp that looked perfect but indeed something wasn't, so maybe there is more that we can see.

Just giving the benefit of the doubt as we don't have the vial in hand.

Post a video of the leaking buddy.

The crimp issue has to be fixed by the source but we wanna see if it's really leaking or not.

 

[SYNTAX_ERA]

No it's not leaking. I have crimped my fair share of vials with worse crimping jobs than that and nothing leaked. In order to leak you need the stopper to be loose and that thing is not loose. It's a cosmetic issue that is effecting sales.

You can deny it as much as you want.

There is no convincing you Narta or a way for me to provide evidence of an oily film on the outside of each vial. I dont understand the crimping process as well as you because you brew your own gear then i believe you that the leak is not from inside the vial but the oil must have come from somewhere else?

Yes i admit that i used to sell but no more. Life would be much easier for me to just create a new account without the subscriber tag and the freedom to post where the other members do without restriction or simply to post without others thinking there is a conflict of interest.

I identify a fault and troubleshoot the cause the best i can, if someone with more knowledge and experience can point out i am wrong i will gladly change my mind.

 

[narta]

Narta I have seen a vial leaking with a crimp that looked perfect but indeed something wasn't, so maybe there is more that we can see.

Me too. But that cap was loose. This cap is tight af and you can see that because of the pinch, the underside rim is pressed.

 

[bigboy420]

Offtopic
Does anyone watch china insiders on youtube?
The things you learn about china

 

[narta]

There is no convincing you Narta or a way for me to provide evidence of an oily film on the outside of each vial. I dont understand the crimping process as well as you because you brew your own gear then i believe you that the leak is not from inside the vial but the oil must have come from somewhere else?

Yes i admit that i used to sell but no more. Life would be much easier for me to just create a new account without the subscriber tag and the freedom to post where the other members do without restriction or simply to post without others thinking there is a conflict of interest.

I identify a fault and troubleshoot the cause the best i can, if someone with more knowledge and experience can point out i am wrong i will gladly change my mind.

Do all the vials leak? They could be easily "tainted" by a broken one. Wipe them down with iso and some paper and let them upside down for a day. If there is indeed leaking from the vials, they should all leak again.

I am not hostile or anything, but it makes no sense for a tightly crimped looking vial to leak when you can just put the stopper in place and it will hold tightly with no leaking whatsoever, with no cap in place. You need to violently shake it to come off/break the seal.

 

[roofer22]

I PMed QSC and emailed them, as I'm interested in their products, but haven't heard back. It's been a few days. Are they still in business? I'm trying to get a pricelist from them. Is that a fuck up on my part, am I breaking rules on accident or something?

Click on Tracy's name and search his messages for pastebin in this tread. You'll find your answer.

 

[SYNTAX_ERA]

Do all the vials leak? They could be easily "tainted" by a broken one. Wipe them down with iso and some paper and let them upside down for a day. If there is indeed leaking from the vials, they should all leak again.

I am not hostile or anything, but it makes no sense for a tightly crimped looking vial to leak when you can just put the stopper in place and it will hold tightly with no leaking whatsoever, with no cap in place. You need to violently shake it to come off/break the seal.

When you explain it like this it makes sense, the stopper itself will prevent leaks. I will wipe them all down and leave overnight as you suggest. Perhaps there is a fine crack in one that i cannot see. If no leaks then its fine to pin.

 

[narta]

When you explain it like this it makes sense, the stopper itself will prevent leaks. I will wipe them all down and leave overnight as you suggest. Perhaps there is a fine crack in one that i cannot see. If no leaks then its fine to pin.

I can come as an ahole sometimes, but I am not, unless I am on 19-nors and some fking bird shits in my coffee mug.

No 19-nors or birdshit today, so sorry if I offended you.

 

[SYNTAX_ERA]

I can come as an ahole sometimes, but I am not, unless I am on 19-nors and some fking bird shits in my coffee mug.

No 19-nors or birdshit today, so sorry if I offended you.

You helped me trouble shoot the fault, i appreciate it. I lost my temper today and looked for someone to blame and i was wrong.

 

[Roidzilla]

No one can successfully insult me who uses 10iu HGH daily and still looks like a natural

 

[Benf15harp]

Can GW501516 raws be used in capsules?

 

[Dirthand]

fking bird shits in my coffee mug.

Dam birds....

 

[Dirthand]

No one can successfully insult me who uses 10iu HGH daily and still looks like a natural

I see people do it successfully all the time!!10iu or not!!!

 

[narta]

No one can successfully insult me who uses 10iu HGH daily and still looks like a natural

You should try talking to the mirror. No hgh but the insult will be obvious.

 

[GearUnit]

Is there already a time window when the EU warehouse opens again?
@Qingdao Sigma Chemicals

They told me no a couple of days ago

 

[BuildABro]

If memory serves, we should get an oil promo today.

 

[watchtymeflyyy]

If memory serves, we should get an oil promo today.

Think he said tomorrow… Yeah I know, that’s not the middle of the week lol