PHARMACOM Jano test results

[BigJP]

When did you purchase this batch? Only reason I’m asking is cause their testing is from April this year? What warehouse did you order from as well

August, international

 

[RThoads]

@BigJP Thanks again for getting testing done and sharing your results.
We all benefit from analysis results (I also use these products).

I also thanked you in the Basicstero thread but want to share my reply about the results here as well because not everyone will see my other replies.

Just so guys that may not know me understand, I have also always shared the results I get even when those results may have been less than ideal.

I want to investigate this situation and try to figure out what's going on, and do my best to help everyone.
There can be variation in individual testing results. I have seen other customers share Jano results from the same time (August/September 2025), such as those posted on Reddit, that show different, very good, results for some of these exact same products.
For example:
View: https://www.reddit.com/r/Basicstero/comments/1ntrn1r/masteron_and_primo_results/


Let me make another thing clear here: I trust Jano and I have shared Jano results now for years now; just look at my own posts here in the analytic result section.
I did not say anything negative about Jano or the results. The Reddit results are also from Jano after all.

But I cannot change the results -- the data is the data.
I'm not sure there are even any stock left for some of these products.
So, I don't know if its even possible for me to request another sample of any of these to get more testing or try to determine what's going on.

Some of these products may not ever be produced again because of the raw material shortage (shortage is a soft word -- the fact is that the chemicals to make some AAS are not produced anymore).
I just don't know -- no one knows -- if/when some of the compounds will ever be produced again.
If the raw material situation does not change, some things may never be made again, by any source, in our lifetimes.

I did not do the math to see how much some of these results are underdosed, but I can see that the results came back less than label claim.
You guys are welcome to get all excited and spend many hours bashing the source -- I agree the results are below label claim, so no problem, go for it. But, the results are what they are, and the fact is that some of these compounds are no longer available.

I adjust my dosages based on me personal response monitored by blood work regardless of what the label or analytic results show.
Please understand that we each respond to things differently and metabolize drugs differently, so bloodwork is only useful to the specific individual that gave the blood sample (to be clear, bloodwork is not an analytic method to determine product quality).

I still want to use AAS and need to get them somewhere; and, Pharmacom Labs products are still my best option.
These results show me that the chemicals are in the vials are the compounds I want; I can't risk some random source and not knowing what chemicals are in the vial.
I have seen some recent results where labs put aspartame or acetaminophen, and even harmful narcotics, etc. in vials instead of AAS.
I just can't risk starting over and trying some random source right now.

I do not see anything dangerous or harmful in these results.
These results do not show something tragic or harmful, such as contamination or toxic impurities etc.
These results simply show that my shot of AAS may have a little less AAS than I thought.

So, for me, I will still be using these Pharmacom Labs products.

Of course, I respect to each his or her own, some of you may have access to other good sources (I personally do not have that luxury at the moment), and that you each may make your own choices regarding what you use or don't use.
Pharmacom Labs is still by far my best option.

 

[RThoads]

@BigJP
Where did you buy these products? From which source?
If they are from Basicstero, please reply to me with the order number in the Basicstero thread (quote below).

@BigJP Where did you buy these products?
From which source?
If they are from Basicstero, what is the Basicstero order number that these vials came from?
I am investigating this situation.

 

[YiL]

Received the same batch today!

 

[RThoads]

View attachment 367103

Received the same batch today!

Please see Basicstero's testing offer at the post quoted below.

Basicstero is looking for 3 volunteers to get analytic testing performed on the specific TEST-E300 and MIX-M batches listed below.

The MESO community and Basicstero want to see additional analytic results for the exact same batch that is in question so we can get more data and Pharmacom Labs may make improvements, if an issue that can be improved upon is identified.

If you have any brand-new unopened samples of the following products, please consider volunteering for this project. Volunteers may be selected or declined at Basicstero’s discretion.

PHARMA TEST-E300: batch #PHT300014EV

PHARMA MIX-M: batch #PHDR00007MV

Please reply here in the Basicstero thread if you meet the requirements and are interested in volunteering.

Basicstero is primarily interested in the TEST-E300 result because this is one of the most popular and common products and there are still some other moderate to long ester replacements available to customers at this time.
The MIX-M result is also of some interest but it is understood that this is a much less common product and there are no analogous replacements available to customers because of the raws shortage – there are no new batches currently planned as a result of the raw material shortage.
The NPP result is not of interest because the result in question is already extremely close to being a pass in the +/- 10% acceptable tolerance range and these is some variance in testing results.

Requirements: each volunteer must have a brand-new unopened sample from the exact same batch (listed above) that BigJP had tested and be able to provide the valid Basicstero order number for the purchase of each sample.
Please provide photographs of the sample to clearly show the batch number.
The sample must be sent to, and received by, the analytic service in brand-new and unopened condition (the top cap must still be sealed on the vial as it comes from the store), to help eliminate as many variables as possible.

The volunteers must each agree to send the sample of the specific batch in question to Jano* and pay for their own testing expenses.
The volunteers must also agree to provide Basicstero and Pharmacom Labs access to the results and grant Basicstero and Pharmacom Labs the permission to share the results anywhere at any time (the client’s name and any other personal identifying information will be redacted on the analytic report before it is shared).

Compensation: Basicstero agrees to the following compensation package for each volunteer; the value of the compensation will be issued as Basicstero store credit, added to the volunteer’s Basicstero account balance (which may be used in the Basicstero store at any time), after the analytic results are completed and the final reports are made available to Basicstero.

1) $120 USD credit for “Common AAS Screening Quantitative” (Janoshik Analytical).

2) $100 USD credit for the donated TEST-E300 sample (this is more than anyone paid for a single TEST-E300 product from Basicstero, so it clearly covers the cost of an analogous replacement from any warehouse).

Or, If the donated sample cost the customer more than $100 USD, then the exact cost of the sample will be credited instead (so the customer will get the greater amount), which can be verified by the order number (to show from which warehouse the sample was purchased and the cost can be verified).

In the rare event an individual volunteer has samples of both products in question (TEST-E300 and MIX-M), then the sum of the exact costs of the samples will be credited, because the cost of both products combined may be greater than the $100 reward.

3) $100 USD credit additional bonus to thank the volunteer for his or her time and effort in helping us all with this project, and to offset shipping expenses.

Therefore, the compensation credited to each volunteer’s account will be no less than $320 USD total.

*NOTE: Jano appears to be the most popular analytic service available at this time; nonetheless, if a volunteer strongly prefers to use a different analytic service, we can discuss it and present the idea to Basicstero for consideration; approval for a different analytic service must be obtained from Basicstero before moving forward with the project. However, the analytic service used must be well-known and reputable and the cost must be very similar to Jano’s service (not something such as double the cost).

IMPORTANT: please do not take it upon yourself to send a sample and expect Basicstero to compensate you; Basicstero is not required to compensate you unless it has been agreed upon and it is publicly stated here in the thread that you have been selected.
You must volunteer, have a sample that meets the requirements (you may be asked to provide the product photo to show you do have a brand-new unopened sample from the correct batch to ensure no one’s time or resources are wasted), and get approval to consider it an agreement.

Thank you all for your consideration.





@BALLISTIC and @Raww
Thanks again for the good suggestion.

 

[YiL]

I’m definitely gonna send in a sample!

Count me in as a volunteer!

 

[RThoads]

I’m definitely gonna send in a sample!

Count me in as a volunteer!

Awesome! thank you for for your interest and willingness to help with this project.
Please reply in the source's thread to state that you volunteer (the source does not follow other threads and I need PHL's approval for any volunteers -- I do not have any authority).
Then, wait for communication and confirmation that you have been accepted, if you want the source to reimburse you.
Of course, if you're not interested in reimbursement, you're free to do whatever you want whenever you want and don't need to communicate with the source.
But, if you would like to be part of the testing project the source is sponsoring and get the reimbursements/reward-bonus etc., you have to post in the source's thread and get approval.

Please reply here in the Basicstero thread if you meet the requirements and are interested in volunteering.

IMPORTANT: please do not take it upon yourself to send a sample and expect Basicstero to compensate you; Basicstero is not required to compensate you unless it has been agreed upon and it is publicly stated here in the thread that you have been selected.
You must volunteer, have a sample that meets the requirements (you may be asked to provide the product photo to show you do have a brand-new unopened sample from the correct batch to ensure no one’s time or resources are wasted), and get approval to consider it an agreement.

Thank you all for your consideration.