Community Review: IndiaMart Ancillaries

[Photon]

Ok i get what you're saying.

First off, i'd use a 3ml syringe as suggested by @bananafeet, my disposable amp opener wasn't stiff enough, maybe it's cause i've done over 200 amps, who knows. it's time to dispose it. But the amps are indeed harder to break than some amps.

When you break the amp, you want to
(1) place your thumb directly over the circle (break amp spot)
(2) apply pressure by pushing the thumb down first and then pushing the rest of the fingers forward, imagine you are breaking a stick or something

The oil does indeed remain in the amp.
View attachment 378560
You turn the amp completely upside down, facing the ground, then tap the middle of the flat base of the amp. 3-4 taps and it's all out.

I emptied them into a beaker but you can use a shot glass or whatever clear glass you got. It doesn't matter if glass drops into the beaker, it'll all be filtered out.
View attachment 378561

Goes really quick once you find the angle to snap it
break em all, then start backfilling.

I tried backfilling directly into the syringe.



Works but it's slower.

Just prop the syringe and make sure it doesn't move.
Make sure the syringe has something connected, else the liquid's just gonna flow out. I used a 30g, the thinner the better. If you don't have anything just use a syringe filter but leave it in the sterile pack.

Shree's amps are shorter than HP, which makes gripping it much harder.
Using an alcohol wipe which @bananafeet recommended above or a paper towel to grip the amp at the bottom helps significantly.

 

[Photon]

The methopush doesnt have any Benzyl alcohol in it i believe. Without that isnt it hard to guarantee sterility even though you are passing it through a filter?

You are right.
All amps in general have no b.a.

You'd need to add 0.1ml of b.a to each vial.
This is the cheapest place to get it, simply because they do not charge shipping.

Benzyl Alcohol

INCI Name: Benzyl AlcoholCAS Number: 100-51-6Molecular Formula: C₇H₈OAppearance: Clear, colorless liquid with a mild aromatic odorSolubility: Soluble in alcohol and water Benzyl Alcohol is a versatile, aromatic alcohol widely used as a preservative, solvent, and fragrance ingredient in cosmetic...

talsenchem.com

 

[Photon]

Edit: Adenoheal yes I'm getting them for 1.00 each so throwing them in was no biggy, I couldn't find that anywhere.

That's really cheap.
400mgx10=4g for $1?
100g=25$

Cheaper than just taking the powder directly.
Tho it does come with customs risk.

https://www.bulksupplements.com/products/same-supplement?variant=44287112609986

 

[Photon]

I tried backfilling directly into the syringe.

Works but it's slower.

Just prop the syringe and make sure it doesn't move.
Make sure the syringe has something connected, else the liquid's just gonna flow out. I used a 30g, the thinner the better. If you don't have anything just use a syringe filter but leave it in the sterile pack.

Shree's amps are shorter than HP, which makes gripping it much harder.
Using an alcohol wipe which @bananafeet recommended above or a paper towel to grip the amp at the bottom helps significantly.

I take that back, i do not recommend using a syringe filter.
It suddenly started gushing out of my syringe filter when i had like 9ml in it.


Use a really thin needle instead.

 

[bananafeet]

I take that back, i do not recommend using a syringe filter.
It suddenly started gushing out of my syringe filter when i had like 9ml in it.


Use a really thin needle instead.

Seems like a lot of work. One of the bonuses of amps is of permeability.

Putting in a vial just increases atmospheric exchange and increases risk of contamination and oxidisation.

I put some tren ace from 2022 in a syringe and left it there for a few days. Went darker than the original amps which had been in storage for like 4 years. So it's not a minor thing in my experience.

 

[BendigoShafter]

You are right.
All amps in general have no b.a.

You'd need to add 0.1ml of b.a to each vial.
This is the cheapest place to get it, simply because they do not charge shipping.

Benzyl Alcohol

INCI Name: Benzyl AlcoholCAS Number: 100-51-6Molecular Formula: C₇H₈OAppearance: Clear, colorless liquid with a mild aromatic odorSolubility: Soluble in alcohol and water Benzyl Alcohol is a versatile, aromatic alcohol widely used as a preservative, solvent, and fragrance ingredient in cosmetic...

talsenchem.com

Those guys also have a great price on glutathione raws, thanks for the link. I'll browse them

 

[Photon]

Seems like a lot of work. One of the bonuses of amps is of permeability.

Putting in a vial just increases atmospheric exchange and increases risk of contamination and oxidisation.

I put some tren ace from 2022 in a syringe and left it there for a few days. Went darker than the original amps which had been in storage for like 4 years. So it's not a minor thing in my experience.

Oxidation and light do both play a part.
In a vial, you can fill it as much as possible to reduce oxygen.

Quickest way is still to pop all amps into a glass cup then backfill.

 

[AlexDavis43]

I had a rohit package marked as delivered from usps, but it didnt arrive. checked cameras, delivery man didnt actually deliver it. what do you do? call assume they dont know whats inside and complain, just wait, or call it gg maybe they want me to call to confirm the package it is mine and get me.

all answers welcome

dunno mate but don't forget to take a video of you opening the pack and taking out all the products if/when it lands

 

[AlexDavis43]

I tried backfilling directly into the syringe.

View attachment 378596

Works but it's slower.

Just prop the syringe and make sure it doesn't move.
Make sure the syringe has something connected, else the liquid's just gonna flow out. I used a 30g, the thinner the better. If you don't have anything just use a syringe filter but leave it in the sterile pack.

Shree's amps are shorter than HP, which makes gripping it much harder.
Using an alcohol wipe which @bananafeet recommended above or a paper towel to grip the amp at the bottom helps significantly.

there's gotta be a million ways to better stabilize the syringe that's being backfilled other than just resting it in a light plastic cup

looks way too easy to knock over

 

[BALLISTIC]

there's gotta be a million ways to better stabilize the syringe that's being backfilled other than just resting it in a light plastic cup

looks way too easy to knock over

If it happens I'm going to start licking the counter. Haha

 

[Photon]

there's gotta be a million ways to better stabilize the syringe that's being backfilled other than just resting it in a light plastic cup

looks way too easy to knock over

I'm not doing that again. Poping them all into a beaker is multiple times quicker.

 

[BALLISTIC]

I take that back, i do not recommend using a syringe filter.
It suddenly started gushing out of my syringe filter when i had like 9ml in it.


Use a really thin needle instead.

If you tried it again maybe a simple syringe cap would be beneficial? Your method seems good and fast. But I figured it might start dripping through.

 

[BALLISTIC]

I'm not doing that again. Poping them all into a beaker is multiple times quicker.

Luer lock cap