Brewing Test P, I need advice or scolding!?!

[dasking]

I am needing to brew some test prop! I prefer GSO as I've had little to no negatives from GSO. But I want to thin it out more.

For example i have Test E brewed at 350mg/ml & 2/35% ba/bb. No pip no pain and I often use it to cut my 150mg/ml primo in mct oil to mitigate pip. Miglyol causes me swelling and pip over time, MCT oil the supposedly same c8/c12 ratio and i don't swell but i get pip at the least. Unless I mix it with even 20% of my gso test e. I've mixed ML's into vials and it stays one homogeneous solution no separation with the BB.

I have mct oil, GSO and some castor oil i got from a local pharmacy. Part of me wants to mix some strong and cut it if neeeded another part says u have grams not kilos just follow a recipe.

I REALLY cannot stop thinking about something like 35%bb, 2%ba, 40% MCT, ≈20% GSO or castor oil.

 

[narta]

Go for the standard 100mg/ml

 

[y777]

I brewed test p sesame oil 150mg with 20-25% bb.

I experimented with castor oil once at 200mg which held for a few weeks. Typically wouldn’t brew w the thick oil but wanted to extend half life cuz at the time I ran out of cyp/enth and only had prop on hand.

Sesame will extend the half life slightly by maybe a day over MCT so if you want a better kick mentally I’d keep it to 100mg with MCT. No experience with miglyol and if that would facilitate a PIP-less >100mg brew

 

[dasking]

Go for the standard 100mg/ml

I have a complicated for me, question I've been attempting to put into a logical question for you for days now @narta. Thank you so for commenting in the first place.

Me not being able to word my question appropriately makes it clear 2 me im being too complicated. Answers my question right there.

 

[narta]

You can always go for higher concentration and if there is pip, dilute it down.

 

[Sampei]

I am needing to brew some test prop! I prefer GSO as I've had little to no negatives from GSO. But I want to thin it out more.

For example i have Test E brewed at 350mg/ml & 2/35% ba/bb. No pip no pain and I often use it to cut my 150mg/ml primo in mct oil to mitigate pip. Miglyol causes me swelling and pip over time, MCT oil the supposedly same c8/c12 ratio and i don't swell but i get pip at the least. Unless I mix it with even 20% of my gso test e. I've mixed ML's into vials and it stays one homogeneous solution no separation with the BB.

I have mct oil, GSO and some castor oil i got from a local pharmacy. Part of me wants to mix some strong and cut it if neeeded another part says u have grams not kilos just follow a recipe.

I REALLY cannot stop thinking about something like 35%bb, 2%ba, 40% MCT, ≈20% GSO or castor oil.

You brewed test E with 35% BB? Lol

 

[buck]

Just looked at a bottle that has been sitting in my drug chest since 2008. TP 100mg overdosed it 10% so 110mg actually. 2/20 in what i would bet is cottonseed oil as that is what i tended to use back then. Never had any swelling or PIP. Still holding fine. Haven't used and in many years. Ahhh fond memories!

 

[dasking]

You brewed test E with 35% BB? Lol

Yes small batch testing the boundaries of what I can tolerate and do comfortably and hold in my climate zone without re warming all the time.

 

[dasking]

You can always go for higher concentration and if there is pip, dilute it down.

100% been there done that recently. Frankly I think too much for the expirence I have. I get to a point of paralysis by analysis. As long as I don't concoct something dangerous I know how to make it usable again.

 

[Sampei]

Yes small batch testing the boundaries of what I can tolerate and do comfortably and hold in my climate zone without re warming all the time.

But man you can brew test E with like 10% BB xD it will never crash probably not even in the freezer..you don't need 35% BB at all

 

[Denicnut2427]

I am needing to brew some test prop! I prefer GSO as I've had little to no negatives from GSO. But I want to thin it out more.

For example i have Test E brewed at 350mg/ml & 2/35% ba/bb. No pip no pain and I often use it to cut my 150mg/ml primo in mct oil to mitigate pip. Miglyol causes me swelling and pip over time, MCT oil the supposedly same c8/c12 ratio and i don't swell but i get pip at the least. Unless I mix it with even 20% of my gso test e. I've mixed ML's into vials and it stays one homogeneous solution no separation with the BB.

I have mct oil, GSO and some castor oil i got from a local pharmacy. Part of me wants to mix some strong and cut it if neeeded another part says u have grams not kilos just follow a recipe.

I REALLY cannot stop thinking about something like 35%bb, 2%ba, 40% MCT, ≈20% GSO or castor oil.

1% ba 18%bb for 100mg test propionate in gso or mct is fine and you can use 10% overage in raws! Done it 15-20 times it’s just fine! Your test enth you can use the same for 350mg that’s way too much bb you used for that bro

 

[dasking]

But man you can brew test E with like 10% BB xD it will never crash probably not even in the freezer..you don't need 35% BB at all

I have pics, I promise 350 in gso was crashing like crazy, my 250s crashed in 20%bb from leaving my window cracked open overnight. Not saying it's my normal or should be repeated i anticipated I would need to cut it before I ever used it. Then I used it and it was actually great for a few minor issues I was having.

Plus for me idfk why but the higher BB only cost me more money on labs to verify, and mitigated alot of pip I was having from primo when mixed idk why.

Not trying to defend or say any one else should do so. I was more so saying I've done it and tolerated it because.....

I 100% was thinking too much and subconsciously wanting to get talked out of attempting a high concentration test P mix. I got lucky with the Test E that time.

 

[Sampei]

I have pics, I promise 350 in gso was crashing like crazy, my 250s crashed in 20%bb from leaving my window cracked open overnight. Not saying it's my normal or should be repeated i anticipated I would need to cut it before I ever used it. Then I used it and it was actually great for a few minor issues I was having.

Plus for me idfk why but the higher BB only cost me more money on labs to verify, and mitigated alot of pip I was having from primo when mixed idk why.

Not trying to defend or say any one else should do so. I was more so saying I've done it and tolerated it because.....

I 100% was thinking too much and subconsciously wanting to get talked out of attempting a high concentration test P mix. I got lucky with the Test E that time.

It's not like high BB is bad or anything it's just that test E is.one of those raws that can almost be brewed without any BB.
Similar to Deca for example.

I mean if it works for you and it doesn't give you any issue, keep going for it no problem.

 

[dasking]

It's not like high BB is bad or anything it's just that test E is.one of those raws that can almost be brewed without any BB.
Similar to Deca for example.

I mean if it works for you and it doesn't give you any issue, keep going for it no problem.

That's why I got test E to start with. I was having really bad reactions to various brands and oil types. I couldn't determine exactly why. I thought I was going to be that guy allergic to BB. My first batch was low bb as possible but crashed hours later (winter). Less than 10%bb.

Thank God I'm not allergic, I was a mess from chronic inflammation for a hot minute.

 

[dasking]

It's not like high BB is bad or anything it's just that test E is.one of those raws that can almost be brewed without any BB.
Similar to Deca for example.

I mean if it works for you and it doesn't give you any issue, keep going for it no problem.

I happened across a crashed vials going through stuff. I sware its not even that cold but. It's annoying!

 

[Sampei]

I happened across a crashed vials going through stuff. I sware its not even that cold but. It's annoying!

You sure you have test E?

 

[dasking]

You sure you have test E?

lol not really, that's what I was just thinking about... It was from QSC b4 the new years sales volume started.

But I'm looking at my stash only 2 things still crashed test cyp from qsc and that vial of gso test e from qsc raws. It brews so easy tho I couldn't imagine what else it could be.

 

[OasAAS]

Im finishing up a Test P 100 brew.

I don’t personally see the need to go much higher on that ester… on blast can pin ED. Need more? Just add either 2ml or some Test C/D/U(me rn).

who honestly uses & can justify like a test 400 blend?

 

[OasAAS]

lol not really, that's what I was just thinking about... It was from QSC b4 the new years sales volume started.

But I'm looking at my stash only 2 things still crashed test cyp from qsc and that vial of gso test e from qsc raws. It brews so easy tho I couldn't imagine what else it could be.

Yeah no way the most tested source provided real Test E! At the bottom of the list cost wise- makes no sense.

 

[dasking]

Im finishing up a Test P 100 brew.

I don’t personally see the need to go much higher on that ester… on blast can pin ED. Need more? Just add either 2ml or some Test C/D/U(me rn).

who honestly uses & can justify like a test 400 blend?

yeah I was getting dumb, I hate short esters to start with and was feeling creative. Lead to me contemplating some poor decisions.

Absolutely no need for me to make any high mg short Ester anything realistically.