Want to make your own gear?

[newwave]

i want to make dbol tabs, but i dont have the formula, post that one please

 

[Romulus]

i want to make dbol tabs, but i dont have the formula, post that one please

This is really only applicable to the 17AA steroids Anavar (Oxandrolone) , Winstrol (Stanozolol ) and Dianabol (methandrostenolone). These are the only ones that are orally available. In principle the boldenone undecylenate oil can be taken orally, but daily doses of 200 mg are required, which is basically a waste of money, if a 400 mg per week injection can achieve the same.

Pick up some sesame oil at the health store and find a container for the liquid. Determine the concentration. For Stanozolol aka winstrol (winny) I recommend 25 mg/ml, for dianabol and Anavar I suggest 20 mg/ml. Say you have 1 gram of Dianabol. That's 1000 mg.
At 20 mg per ml that equates to 50 ml of oil. So for every gram of powder you have you will make 50 ml of solution. Fill the container up with water, 50 ml per gram. If you have 5 grams, then that's 250 ml. Mark that spot on the container. Dump out the water and let the container dry. Dump the powder in the container and then add oil until you reach the mark you made on the container. You know have your solution at 20 mg/ml.

I suggest taking 2 ml per day (40 mg) in the morning. Use a syringe to measure out 2 ml and squirt it in your mouth, wash it down with the beverage of your choice. Remember to never use a 17AA steroid longer than 6, at the very longest 8 weeks on end, because these substances are toxic to the liver.

Remember that you need 50 ml per gram of powder for ox and Dianabol (methandrostenolone) and 40 ml for Stanozolol. This does not mean 50 and 40 ml of oil, it means 50 or 40 ml of oil, minus the space the powder takes up.
Author: ?????

From BassKiller's site

 

[novicebb]

Certainly there are some advantages. There are also disadvantages.

For example; do the people you live with know you use steroids? Because it's a little hard for everyone not to see the mad scientist in the kitchen with oils, powders, solvents, filters, vials and measuring devices strewn around. And just when you think everyone's gone... someone forgot something and comes back home, walking in on you.

And as far as actually making it, it's not really hard but you do need to know what you're doing. What type of oil, how much oil, how much BA, BB or any other solvents do you use... and the numbers all change depending on what you're making. Do you have the filters, vials, caps, stoppers and crimpers? What about the multiple flasks, funnels, stirrers and don't forget your scale which should be accurate down to 0.01g.

However the more serious problem is: how much do you trust that little bag of powder to contain what it's supposed to contain. How many people do you suppose have thought about your order of 5 grams of anavar powder, which costs about $30/gram and thought... I'll save a little money by sending this yokel 5 grams of winstrol powder... which costs about $3/gram. So you just paid $150 for something that should have cost you $15. But, you use it and get the results you expected, so you're a happy Sucker.

It would be a good idea to know your various melting points and use a melting point thermometer.

Of course the same thing can happen with gear made by an UG lab so my point is, just be aware that things like that happen and making your own gear is no guarantee you're really making what you think you're making.

So before you jump on the "make your own" bandwagon, consider the practicality, up front costs, messed up batches and uncertainty of product. If you're ok with these factors and can research it so you really know what you're doing, then give it a try.

Good luck,
MaxRep

$30/g for Oxandrolone is way too high. I would be concern if someone paid half that per gram

 

[Catch_Dee]

started reading this thread and halfway through i looked at the dates. this thread is 5 years old, lol.

Similar situation although its now 2017? Lol. Still interested in the topic though

 

[XKawN]

Similar situation although its now 2017? Lol. Still interested in the topic though

And I'm still here... reading this thread.

 

[John Daley]

I am glad this got bumped in 2017 so I am not the culprit.

Looks like research will begin on my part to find out exactly how in depth a homebrew is. I am considering investing about 2k on stocks to start earning some long term savings.. but Homebrew could be a much better answer.

 

[Sk8man101]

I am glad this got bumped in 2017 so I am not the culprit.

Looks like research will begin on my part to find out exactly how in depth a homebrew is. I am considering investing about 2k on stocks to start earning some long term savings.. but Homebrew could be a much better answer.

That is not homebrewing, that is called sourcing which is quite different.

 

[Scottyhash74]

This post is to see how many bro's would like to be able to make their own gear. The main advantage of making your own gear is how cheap it is since you'd be averaging $1-$2 per ml for test and $2-$3ml for Deca etc.

Actually in my opinion the best part of producing your own gear is simply knowing that's it's 100% real and accurately dosed.

All you have to do is order the powders domestically, which btw I have to bump rphen***....received in 1day. Then everything else you need can be ordered from getpinz.com, also received in 1day. Then it takes about 2 hours to make the gear....anyone can do it.

For the hypochondriacs, which I am, you can be more certain the gear is sterile by making it yourself!!!

Hey TigerStyle1 you mentioned a DOMESTIC Raw supplier rphn***. Could you pm me his site plz? Sure beats LMC and a couple others im aware of in China.
Thx Bro~

 

[Heavy Iron]

Hey TigerStyle1 you mentioned a DOMESTIC Raw supplier rphn***. Could you pm me his site plz? Sure beats LMC and a couple others im aware of in China.
Thx Bro~

You do realize that post is from 13 years ago... And he hasn't been active in 12 years?