How to work with RAW DNP???

SacToSD

New Member
So I'm a chemical researcher, and will be getting raw dnp this week. The problem that I have is that my chemical handling supplies are limited, and I've never worked with this stuff before. How do you guys cap this stuff without a pill capping machine? Can you do it without turning yellow? Thanks bros
 
You have to be careful with this stuff because of its potency.Its not a good product to learn how to cap with.
For a product like this you'd want to cut it heavily ,so use large caps {0}that way if you have a slight dosage variation it will be minimized by the potency diluting cut.
Just make caps at 100mg since you will be learning.Here's a post I made on how to make caps.


You need a "cap em quick"
Size 'O' empty gel caps.
Scales accurate to .1 or .01 of a gram.
plus a filler powder of your choice

The first batch takes the longest, as you'll need to do some weighing and recording,but if you write down the weights and use the same filler,other batches will be a lot faster to make.

Using size "O" caps you'll need a filler,as each cap holds around 500mg and thats a bit much for one cap of AAS

Lets say you just want to make some caps with 30 mg of anavar

A "cap em quick" makes 50 caps in a batch.

So you get 50 empty gel caps and weigh them,write down the weight of these empty caps.

Then you place the 50 caps in your "cap em quick" and fill them with your chosen filler {e.g creatine or taurine}
Then weigh the fill caps,write down the weight

Subtract the weight of the empty gel caps from the amount of the fill caps .Subtract the weight of the Anavar 30mg x 50 {1.5 grams}

Now you now how much filler you need. write it down {should be around 22gm filler.}

Now weigh out your Anavar{1.5 g},you can add food coloring to it which can be of help in checking how well it is mixing.
Weigh out your filler and add both together ,mix{blend in}vigorously in a small bowl or cup with a folk before placing in a sandwich bag and shaking the hell out of it.
or for larger quantities you can mix in a clean coffee grinder.

Now put 50 gel caps in the "cap em quick" and start capping em.
Fill em up,you should have the exact amount of blended powder to top them up.
 
You have to be careful with this stuff because of its potency.Its not a good product to learn how to cap with.
For a product like this you'd want to cut it heavily ,so use large caps {0}that way if you have a slight dosage variation it will be minimized by the potency diluting cut.
Just make caps at 100mg since you will be learning.Here's a post I made on how to make caps.


You need a "cap em quick"
Size 'O' empty gel caps.
Scales accurate to .1 or .01 of a gram.
plus a filler powder of your choice

The first batch takes the longest, as you'll need to do some weighing and recording,but if you write down the weights and use the same filler,other batches will be a lot faster to make.

Using size "O" caps you'll need a filler,as each cap holds around 500mg and thats a bit much for one cap of AAS

Lets say you just want to make some caps with 30 mg of anavar

A "cap em quick" makes 50 caps in a batch.

So you get 50 empty gel caps and weigh them,write down the weight of these empty caps.

Then you place the 50 caps in your "cap em quick" and fill them with your chosen filler {e.g creatine or taurine}
Then weigh the fill caps,write down the weight

Subtract the weight of the empty gel caps from the amount of the fill caps .Subtract the weight of the Anavar 30mg x 50 {1.5 grams}

Now you now how much filler you need. write it down {should be around 22gm filler.}

Now weigh out your Anavar{1.5 g},you can add food coloring to it which can be of help in checking how well it is mixing.
Weigh out your filler and add both together ,mix{blend in}vigorously in a small bowl or cup with a folk before placing in a sandwich bag and shaking the hell out of it.
or for larger quantities you can mix in a clean coffee grinder.

Now put 50 gel caps in the "cap em quick" and start capping em.
Fill em up,you should have the exact amount of blended powder to top them up.

Thanks bro. This is a very helpful post. I don't have a capper, but could get one. I was wondering if I might just craft a miniature funnel, and then weigh out 100mg of dnp and fill the cap with it (with no filler). I imagine that it's not smart to just eat the raw dnp, if you don't want a yellow mouth. lol
 
You say you're a chemical researcher without even a manual capping device? The chemical researchers I know have tablet presses of their own...
 
anything with DNP is a mess. A good press with a hopper and all is still cleaner than a cap-em-quick - albeit much more expensive and really only cost effective for people in the business.
 
No one really said much about just using a scale to measure out single servings. Can't you just put single servings into single pills everyday without a filler? I could probably do this with a spoon. What do you think?
 
No one really said much about just using a scale to measure out single servings. Can't you just put single servings into single pills everyday without a filler? I could probably do this with a spoon. What do you think?

do you know how 100mg of dnp looks like?

its easier to measure out 10 grams of DNP, use equal weight in filler such as creatine/glutamine like was suggested and then recap them.

if you now have a well mixed 20grams of powder you should be able to divide how much weight should be in each cap for 100gm..

you could snort it if you like...thats a breeze for clean up.
 
Thanks bro. This is a very helpful post. I don't have a capper, but could get one. I was wondering if I might just craft a miniature funnel, and then weigh out 100mg of dnp and fill the cap with it (with no filler). I imagine that it's not smart to just eat the raw dnp, if you don't want a yellow mouth. lol

LOL This fool is going to kill someone!

Caveat emptor!
 
what's the holdup if I have a .1g (100mg) scale and a mini funnel? I think it would work. Anyways, thanks for the replies, guys. I understand all of your concerns, believe me, I do. I just don't see any theoretical difficulty with using uncut dnp going cap by cap.
 
It`s no problem. You just have to accept that YOU WILL get some on your hands and/or clothes.

I'm already trembling in anticipation. Bring on the yellow. I ordered a cap machine, too. I just didn't want to screw up the mixing and overdose some of the pills. I'm doing to do like the guy above said and measure 'em out to 100 mg, to be safe. God knows I don't want an ice water enema.
 
wait... if you're measuring individually and your scale isn't accurate down to at least .01g... dear god.

You do know that if you're scale resolution is only down to .1g that you could actually be using 149mg of DNP before your scale rounds up to .2 right?
 
When he said...

what's the holdup if I have a .1g (100mg) scale and a mini funnel? I think it would work. Anyways, thanks for the replies, guys. I understand all of your concerns, believe me, I do. I just don't see any theoretical difficulty with using uncut dnp going cap by cap.

I thought...

wait... if you're measuring individually and your scale isn't accurate down to at least .01g... dear god.

You do know that if you're scale resolution is only down to .1g that you could actually be using 149mg of DNP before your scale rounds up to .2 right?

and decided to come back in a few days in hopes of..

I'm already trembling in anticipation. Bring on the yellow. I ordered a cap machine, too. I just didn't want to screw up the mixing and overdose some of the pills. I'm doing to do like the guy above said and measure 'em out to 100 mg, to be safe. God knows I want an ice water enema.

Very wise

^ I disagree with you, this time. :D
 
Back
Top