OEP LABS Domestic

[ZaddyZonar]

When samples were sent. The 2 batches were combined as 1. Then the sample was taken for it tobe tested

You are 100% correct. Priory to that one. Our very first TD drop was like this one. In the 80’s in regards to purity. While the pip is still not noticeably present even in low purity. Yes you can tell when it’s 95% because it’s feels, as if you didn’t even pin anything, whatsoever the following day.

I’ll begin compound the remaining compounds per the reports.

Is TNE the last you’re waiting on from Jano?

 

[AllbrandNew]

Our very first TD drop was like this one. In the 80’s in regards to purity. While the pip is still not noticeably present even in low purity. Yes you can tell when it’s 95% because it’s feels, as if you didn’t even pin anything, whatsoever the following day.

FWIW, I got 0 PIP from any iteration of the TD500. Even the testing batch was great, just lower concentration as a result. That current purity is not ideal, so I won't comment on whether it's worth brewing or not as that's above my pay grade, but I couldn't tell the difference in pinning the first to last batches.

 

[Whistles77]

When samples were sent. The 2 batches were combined as 1. Then the sample was taken for it tobe tested

You are 100% correct. Priory to that one. Our very first TD drop was like this one. In the 80’s in regards to purity. While the pip is still not noticeably present even in low purity. Yes you can tell when it’s 95% because it’s feels, as if you didn’t even pin anything, whatsoever the following day.

I’ll begin compound the remaining compounds per the reports.

Im still interested in it

 

[Whistles77]

FWIW, I got 0 PIP from any iteration of the TD500. Even the testing batch was great, just lower concentration as a result. That current purity is not ideal, so I won't comment on whether it's worth brewing or not as that's above my pay grade, but I couldn't tell the difference in pinning the first to last batches.

Good to know it shouldn’t affect pip. Thank you

 

[OEP LABS]

Is TNE the last you’re waiting on from Jano?

That one is in route due to the vendor and I having a back and fourth long winded dispute. However, an agreement was made and everything was resolved.
I will send it no matter for testing and show all as the report comes. Apologies that dispute happened however, for the future it was good and the vendor is 100% moving and doing what they promised todo. So it is good for us all.

 

[crispybacon!]

If anyone would know these specific questions it would be the man himself. I emailed Jano seeking guidance on TD in regards to members questions and concerns. Once I hear back from him I will share his experience.

Looking forward to seeing if Jano can provide any insights.

 

[ZaddyZonar]

That one is in route due to the vendor and I having a back and fourth long winded dispute. However, an agreement was made and everything was resolved.
I will send it no matter for testing and show all as the report comes. Apologies that dispute happened however, for the future it was good and the vendor is 100% moving and doing what they promised todo. So it is good for us all.

Nothing to apologize about. Appreciate your testing.

Curious to hear what Jano has to say about the TD.

 

[Chadlitee]

320mg test E 150 npp weekly zero pip great quality gear will continue to buying for years.

 

[Oldhand]

Can we discuss Purity on TD and if we feel it is deemed usable.

Along with purity on TRE can we say 88% is considered passing?

IMO I’d brew both of them. This is a tough market right now, there is no guarantee the next batch of raws would be in the 90’s.

At least you know the purity so the gear will be dosed correctly. Hopefully Jano has an idea/insight, but I’d still say go for it.

 

[abaddon616]

IMO I’d brew both of them. This is a tough market right now, there is no guarantee the next batch of raws would be in the 90’s.

At least you know the purity so the gear will be dosed correctly. Hopefully Jano has an idea/insight, but I’d still say go for it.

I agree with this but I'd definitely be asking for some reimbursement from the vendor so it doesn't effect your bottom line.

 

[OEP LABS]

View attachment 374942320mg test E 150 npp weekly zero pip great quality gear will continue to buying for years.

Thank you sir I have your credit awaiting my man. At your convenience email me.

IMO I’d brew both of them. This is a tough market right now, there is no guarantee the next batch of raws would be in the 90’s.

At least you know the purity so the gear will be dosed correctly. Hopefully Jano has an idea/insight, but I’d still say go for it.

Thank you @Oldhand I’m going to brew up a small batch to make sure their is no haze, cloudiness, or anything unfamiliar in regards to characteristics to Test Decaonate while we also wait for Jano’s blessing. I was discussing the purity with some members that are in the scientific field and they advised me to do this. Not a bad idea at all. It will give us an idea of the end result

I agree with this but I'd definitely be asking for some reimbursement from the vendor so it doesn't effect your bottom line.

Most definitely will reach out the the vendor

 

[OEP LABS]

While I set up this machine to work these compounds I also reached out to Lab4Tox. The main Lab Analysis Representative was very helpful in answering all my last questions prior to sending samples. The questions below is what I sent her. If anyone would like add please voice your opinion and I will send it her way.

These below, are the questions I sent her. Jano touched on purity via email with me awhile back, I am searching for that email.

I had some questions if I may ask?

If a raw testosterone powder that tested for example low purity, possibly one that tested 84%. In your opinion would that be harmful to the human body ?

In your opinion what this be considered no good ?

Last question if I may ask at what purity would you consider it not usable or degraded past its use?

Thank you

 

[Bwhistle]

The best there is folks^^

 

[BALLISTIC]

While I set up this machine to work these compounds I also reached out to Lab4Tox. The main Lab Analysis Representative was very helpful in answering all my last questions prior to sending samples. The questions below is what I sent her. If anyone would like add please voice your opinion and I will send it her way.

These below, are the questions I sent her. Jano touched on purity via email with me awhile back, I am searching for that email.

I had some questions if I may ask?

If a raw testosterone powder that tested for example low purity, possibly one that tested 84%. In your opinion would that be harmful to the human body ?

In your opinion what this be considered no good ?

Last question if I may ask at what purity would you consider it not usable or degraded past its use?

Thank you

I have limited knowledge but I think it's not inherently toxic just because it’s 84%.
Testosterone itself doesn’t suddenly become poisonous at lower purity. The risk depends on what makes up the missing 16%.....

 

[OEP LABS]

I have limited knowledge but I think it's not inherently toxic just because it’s 84%.
Testosterone itself doesn’t suddenly become poisonous at lower purity. The risk depends on what makes up the missing 16%.....

I agree with you in regards to it not being toxic. Valid concern when you mentioned the remaining 16%.

While its fresh on on their mind. I will inquire with Jano and Lab4Tox if there are any other identifying tests that can be performed on the material for further analysis.