MESO-Rx Sponsor Primal Pharma - US Domestic

[ThatGuy500mg]

I’m a pin cushion with the Test C 250. I haven’t had any PIP with the old green tops or the new black tops. 29g 1/2” insulin pins most of the time but I’ve loaded up the 3ml with a 25g before traveling and still no PIP.

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

 

[Dial It In]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

 

[monster8912]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

Draw with an 18g then pin with 25 or whatever you prefer

 

[TheMoto]

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

Draw with an 18g then pin with 25 or whatever you prefer

Amazon.com

 

[AlteredAttitude]

Amazon.com

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

 

[Dial It In]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

Screw those things

 

[TheMoto]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

never had an issue... they're used with alcohol in hospitals around the world daily. they're designed to be used with alcohol... Medical grade Plastics...

 

[TanFishMan]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

It’s the BB that causes issues. These are great for bac water/peptides/ l-carn

There is a thread on this board showing plastic going milky and cracking using multiple common use carrier combinations

 

[Photon]

never had an issue... they're used with alcohol in hospitals around the world daily. they're designed to be used with alcohol... Medical grade Plastics...

Yes but not the way we use them.
MCT BA BB EO?
How many pharmaceuticals even contain those products?
Hospitals also don't keep these spikes in for that long -- as compared to us.

Post in thread 'Multidose Vial Adapter'

Jul 15, 2025

I just went and check and this is what I am seeing:

100% BB is in rough shape but less than I would have thought. The whole inside of the "tubing" is completely corroded and the spike tip fell off. This is without me agetating it. It was just the weight of the tip that finally broke it off of the corroded piece. The tip is still clear. It makes me wonder what the difference is in the material between parts of these:




You can see the satilite dish looking piece has more corrosion on it and is starting to get "fuzzy" like it is disintegrating.




This might be...

• niqTM

• 
• 

Did

they ever post pictures of their lab setup like several others have?

Not that im aware of, in today's era its all AI generated anyways..

 

[yepyep12]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

i've said this exact same thing. I just ended up backloading the syringe.

 

[ThatGuy500mg]

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

What if you’re using an insulin syringe? I do warm it up before I pull it though. I have some of those smartsite vial access devices on the way to try out

 

[The Answ3r]

Did they ever post pictures of their lab setup like several others have?

I asked for lab photos and he casually dropped this in my email. Said it was “mid-shift.”

 

[Theschnozzberries]

Interesting. Anybody else had pip from the text cyp 250?

I just started his cyp 250. Have done two .5ml shots so far and gotten a good amount of pip

 

[Infernalmango]

I asked for lab photos and he casually dropped this in my email. Said it was “mid-shift.”

View attachment 371403

Food and drink in a gmp area?? I don’t fucking think so!

 

[PrimoKerby]

Does anyone know any vendor that sells Bold Cyp?

 

[Photon]

Does anyone know any vendor that sells Bold Cyp?

GG-Pharma might have it.

Post in thread 'Project Clear Gear: Official Analytical Testing Thread ⎯ EST. 2025'

Jan 3, 2026

See below for our most recent test.

GG PHARMA - BOLD C 200 - Common AAS Screening - JAN2026
[click image or URL to expand] Janoshik Analytical
​

• Vanargandar

• 

 

[Wildcard781]

Interesting. Anybody else had pip from the text cyp 250?

Been using his test cyp 250 for seven weeks. No pip at all.

 

[Mattjason99]

Sure. It’s test c 250. I’ve pinned twice a week for two weeks now, heated the oil for ease and comfort. Has happened every time. My previous source was test e 300, had zero issues from it

What batch is it? I have been running Primals cyp 200 in gso since they opened and it was smooth, but I just bought some vials of the recent cyp 250 in gso batch "P12" a few weeks ago and it's been giving my brother and I pip with knots as well. I emailed Primal asking if they had extra solvent in it or something to keep the cyp from crashing in GSO at 250 in colder temps. Haven't heard anything yet. Just emailed them tonight.

 

[ThatGuy500mg]

What batch is it? I have been running Primals cyp 200 in gso since they opened and it was smooth, but I just bought some vials of the recent cyp 250 in gso batch "P12" a few weeks ago and it's been giving my brother and I pip with knots as well. I emailed Primal asking if they had extra solvent in it or something to keep the cyp from crashing in GSO at 250 in colder temps. Haven't heard anything yet. Just emailed them tonight.

It’s P12 of MCT

 

[Theschnozzberries]

Yep same here. For reference I draw with a separate needle and warm up oil before pinning