Defiant Pharma (US Domestic)

[AllGoodThings]

When you Take your injectable and Adrol how long before the gym do you take it and approximately how many milligrams do you take?

For shorter workouts like chest I'll time it about 1.5 - 2 hours before. For longer workouts like legs, about 1 - 1.5 hours before. For TNE, anywhere between 50 - 150mg. If I'm taking Anadrol, 60 - 120mg (the tabs I have were tested @30mg). I also occasionally take Superdrol in both oral and injectable forms, usually 30 - 50mg, and injectable Methyltrienolone, anywhere from 1.5 - 2.25mg. I'll combine as many as three of these on occasion.

 

[Inkniron87]

For shorter workouts like chest I'll time it about 1.5 - 2 hours before. For longer workouts like legs, about 1 - 1.5 hours before. For TNE, anywhere between 50 - 150mg. If I'm taking Anadrol, 60 - 120mg (the tabs I have were tested @30mg). I also occasionally take Superdrol in both oral and injectable forms, usually 30 - 50mg, and injectable Methyltrienolone, anywhere from 1.5 - 2.25mg. I'll combine as many as three of these on occasion.

Never did tne before. Is it something you feel when it kicks in or just during the workout more productive? I’m interested cause if it gives a burst of energy I could use that at 4am prior to training

 

[AllGoodThings]

Never did tne before. Is it something you feel when it kicks in or just during the workout more productive? I’m interested cause if it gives a burst of energy I could use that at 4am prior to training

I've heard it described as an energized feeling, but I'm not sure if that's how I'd describe it for me. I get more of a mood boost and clarity of thought, kind of difficult to describe, but it helps me feel focused and motivated for my workouts. I might not be a great person to ask as I'm not a strong responder to most AAS in the sense that I don't ever get that "hell yeah I'm pumped up and I'm going to tear these weights apart!!" level of aggression, even on decent doses of compounds notorious for crazy gym aggression. I'm also taking ~2.4g of gear a week right now, and I'm not especially affected by that either. I will say that TNE is a great preworkout, and something that every AAS user should try at some point

 

[readalot]

We then filter our oils via peristaltic pump with whatman 36AS .2um capsule filters

AS stands for Aqueous Solutions. These filters are chemically compatible with what you are filtering?

https://www.cytivalifesciences.com/en/us/products/items/whatman-polycap-as-p-05805

https://www.medical-and-lab-supplie...-filter-capsule-0-2um-nylon-sterile-6705-3602

VS

TF

Whatman Polycap 36TF Capsule Filter, 0.2um 6700-3602

Whatman Cytiva Polycap TF capsule filter 6700-3602 by QCVIALZ. Polypropylene housing capsule filter with a PTFE filter membrane. Whatman Cytiva capsule filters at discount prices.

qcvialz.com

 

[Bwhistle]

Last thing real quick.

Jano has received my samples so should have test results back any day now.

For those who've missed it, samples are as follows.

TE250 (MCT)
TNE75 (MCT)
EQ500 (MCT)

Deca Raw sample for purity.

regards,

D.

Defiant-

Weekend greetings sir.

What’s the list email again and or easiest way to know the eq5 is in stock and good to go. Gonna smash it

 

[RockyP]

Defiant-

Weekend greetings sir.

What’s the list email again and or easiest way to know the eq5 is in stock and good to go. Gonna smash it

Easiest way to know is to check this thread.

 

[Bwhistle]

Easiest way to know is to check this thread.

Well played -

I seem to remember him being email organized and had each item cataloged via sku (back in the day)

 

[RockyP]

Well played -

I seem to remember him being email organized and had each item cataloged via sku (back in the day)

I wasn’t trying to be a dick. I think he’s pretty busy and uses this thread to communicate all inventory updates. You def won’t miss it. Lots of guys are tweaking for it and I think testing results are imminent.

 

[Bwhistle]

I wasn’t trying to be a dick. I think he’s pretty busy and uses this thread to communicate all inventory updates. You def won’t miss it. Lots of guys are tweaking for it and I think testing results are imminent.

Brother I’m on round 3 of a private reserve 5lb bone in prime rib for breakfast . Dick didn’t even pass my brain . Life is good . Enjoy your holiday weekend sir thanks for the help

 

[Defiant Pharma]

AS stands for Aqueous Solutions. These filters are chemically compatible with what you are filtering?

https://www.cytivalifesciences.com/en/us/products/items/whatman-polycap-as-p-05805

https://www.medical-and-lab-supplie...-filter-capsule-0-2um-nylon-sterile-6705-3602

VS

TF

Whatman Polycap 36TF Capsule Filter, 0.2um 6700-3602

Whatman Cytiva Polycap TF capsule filter 6700-3602 by QCVIALZ. Polypropylene housing capsule filter with a PTFE filter membrane. Whatman Cytiva capsule filters at discount prices.

qcvialz.com

@readalot Good question. From my understanding Nylon membranes are well suited for filtering aggressive solutions and have a nice resistance to organic solvents.

I guess the main difference would be one being hydrophilic and the other hydrophobic. TF being the latter.

You really think there would be much of an advantage switching from AS to TF? Would like to hear your take on it.

Keep in mind that I use these filters in one shot so it's not like they're sitting around with solvents slowly eating away at the filter. Also, I filter just a tad over room temp so they're not seeing extreme temps either.

BTW, I wouldn't have any issue switching from one to the other. Just would like to have a nice conducive discussion on it first.

D.

 

[Defiant Pharma]

Defiant-

Weekend greetings sir.

What’s the list email again and or easiest way to know the eq5 is in stock and good to go. Gonna smash it

Well I've tried to get away from the list email thing. Just takes up too much time, especially since I've gotten busier.

I have a permanent pastebin link that I update accordingly. So you can just save/bookmark the link and check there whenever. Posting it below for you.

Also, like someone else mentioned I will post in here when it along with the other compounds are on the list and ready for purchase. Just set notifications on for this thread and it'll update you.


View: https://pastebin.com/LaPVq5d1

 

[readalot]

@readalot Good question. From my understanding Nylon membranes are well suited for filtering aggressive solutions and have a nice resistance to organic solvents.

I guess the main difference would be one being hydrophilic and the other hydrophobic. TF being the latter.

You really think there would be much of an advantage switching from AS to TF? Would like to hear your take on it.

Keep in mind that I use these filters in one shot so it's not like they're sitting around with solvents slowly eating away at the filter. Also, I filter just a tad over room temp so they're not seeing extreme temps either.

BTW, I wouldn't have any issue switching from one to the other. Just would like to have a nice conducive discussion on it first.

D.

Appreciate the thoughtful response. The hydrophobic filter would be a tiny plus for any residual moisture and honestly I havent tested the leachables coming off a oil/BB matrix. AS filter appears to have decent oil compatibility. BB and nylon, not sure if this is an issue. Based on functional groups in BB, probably not. BA looks fine with nylon.

Then we get into tubing. I believe there are sterile PTFE options that are pricey.

Anyway, appreciate your attention to detail. Thought I would bring up. Acids are the real no go with nylon.

https://www.foxxlifesciences.com/pages/nylon-chemical-compatibility

Edit:
@Defiant Pharma
Only very very minor amount of benzoic acid in any good BB product (decomposition product).

Thanks.

 

[Bwhistle]

Well I've tried to get away from the list email thing. Just takes up too much time, especially since I've gotten busier.

I have a permanent pastebin link that I update accordingly. So you can just save/bookmark the link and check there whenever. Posting it below for you.

Also, like someone else mentioned I will post in here when it along with the other compounds are on the list and ready for purchase. Just set notifications on for this thread and it'll update you.


View: https://pastebin.com/LaPVq5d1

Love the upgrade
Thanks D

 

[Defiant Pharma]

Appreciate the thoughtful response. The hydrophobic filter would be a tiny plus for any residual moisture and honestly I havent tested the leachables coming off a oil/BB matrix. AS filter appears to have decent oil compatibility. BB and nylon, not sure if this is an issue. Based on functional groups in BB, probably not. BA looks fine with nylon.

Then we get into tubing. I believe there are sterile PTFE options that are pricey.

Anyway, appreciate your attention to detail. Thought I would bring up. Acids are the real no go with nylon.

https://www.foxxlifesciences.com/pages/nylon-chemical-compatibility

Edit:
@Defiant Pharma
Only very very minor amount of benzoic acid in any good BB product (decomposition product).

Thanks.

Of course man, always up for a good discussion.

I was looking at that same chart you posted to try and confirm what I thought. It's a good reference.

Per your edit I read the same so I'd say the AS are definitely GTG for what we're using them for.

thanks,

D.

 

[CHIEF M]

When you Take your injectable and Adrol how long before the gym do you take it and approximately how many milligrams do you take?

30-45min

 

[CHIEF M]

Injectable superdrol? Or mtren?

 

[Defiant Pharma]

For those asking about when Seros are coming back in stock, I'm sorry I don't have a definitive answer for you.

My guy that I usually get them from I haven't heard back from in over a week now so not sure what is going on.

I will update when I find something out.

regards,

D.

 

[Infernalmango]

For those asking about when Seros are coming back in stock, I'm sorry I don't have a definitive answer for you.

My guy that I usually get them from I haven't heard back from in over a week now so not sure what is going on.

I will update when I find something out.

regards,

D.

Hey D, did you have an estimated price point for the upcoming tne75 and eq500? Apologies if I’m jumping the gun. Just trying to plan out a few orders.

 

[AllGoodThings]

Hey D, did you have an estimated price point for the upcoming tne75 and eq500? Apologies if I’m jumping the gun. Just trying to plan out a few orders.

I believe the TNE75 is going to be right at or very close to $30. Not sure about the EQ500.

 

[Matty_G]

Hey D, did you have an estimated price point for the upcoming tne75 and eq500? Apologies if I’m jumping the gun. Just trying to plan out a few orders.

Think he was planning on pricing eq500 at $70