OEP LABS Domestic

[cajunpauper]

I'll drop this pic here again. I much prefer this style instead of the m3 bolt hinge. I've been printing both for a while and have lately switched completely over to these.

I like those pip hinges

 

[Dial It In]

lol I’ll give it to the carrier pigeon to send to a clandestine location, where a lazily roaming goat will drag it to the whopper layer. There you’ll find a man in a yellow rain suit, and he will deliver it.

Agreed then. But if that man don’t have on a yellow rain suit I’m out

 

[TanFishMan]

I'll drop this pic here again. I much prefer this style instead of the m3 bolt hinge. I've been printing both for a while and have lately switched completely over to these.

These files for free somewhere? I have my own 3d printer

 

[cajunpauper]

These files for free somewhere? I have my own 3d printer

I can share some files a little later on. Open source!

 

[cap’nboldenone]

View attachment 353623

Tell the ai to do it again, but this time fill those bottles to the fucking brim like our man does.

 

[AllbrandNew]

Tell the ai to do it again, but this time fill those bottles to the fucking brim like our man does.

True, but no way I'm wasting more time on a shitpost

 

[sionnach]

lol I’ll give it to the carrier pigeon to send to a clandestine location, where a lazily roaming goat will drag it to the whopper layer. There you’ll find a man in a yellow rain suit, and he will deliver it.

You had me at whopper layer.

 

[sionnach]

These files for free somewhere? I have my own 3d printer

I can share some files a little later on. Open source!

Based parallel economists

 

[asv545]

https://makerworld.com/en/models/1407016-snaplock-v2-parametric-f3d-file

That's the parametric fusion 360 file that I started with. I can dig up my customization for either of the versions in that pic if you want the same thing.

 

[OEP LABS]

@Photon thank you sir for the comments on my hplc reports. I also want to thank you for taking some hard data on the plastic you discovered in regards to the GCMS report on another vendor

Thank you all Men for all the appreciative words and when we talk about brewing and raw material lord that is something I take to heart. I promise you last night I wasn't watching TV or goofing off. More across the lines of answering emails and helping those that have waited the longest periods on me was the objective last night. Had one client wait on me from a different platform for 7 days, I don't feel good about that. Had to make something happen for that man.

However, I took on too much last night and I'm fatigue not gonna lie to you all and Test Cyp is suffering badly. Eq is looking weak you Men are Savages Animals for the Eq haha love it! Glad it tested well for everyone. I will not gouge the price we will leave it because you Men work with me, my schedule so I will return the favor.

Since volume has picked up, a massive flow hood with a HEPA H14 filter was purchased yesterday, it will have its place in the clean for more glass etc final rinse and last process mainly due to the larger volume at hand. The SOP( Standard Operating Procedure)of work stoppage in my opinion should remain if invoices exceed manpower for the day so we can sustain the quality we have.

Again reminds me of bad history if any of you remember the source Symbiotic I think was the name. The man had all the fine equipment but towards the end when volume was at its peak he made an error that he could not dig himself out. Black charred floaters in many batches multiple times that forced him into early retirement.

I want to stay at ground zero so please don't not hesitate to reach out if there is any error on my behalf or even a hint of it. Objective is to not repeat bad history.

Okay ramblings everyone's ear off. Requesting off beginning today till more likely Monday to restock Test Cyp all 4 treys, Eq, and Test prop. If we have enough time 100% make the preworkout blend for fun. Of course as well will hangout with my babygirl(daughter) too you guys already know

Will show Vets the remaining Batch A6 material so they verify /validate it. Will buy upgraded filters as well and post them. As always Men thank you all for following, listening and working with me. We should discuss what should be next for testing?

I'm doing a pre-inspect for flight on the anabolic pigeon. Will check back in soon!

 

[ZaddyZonar]

Since volume has picked up, a massive flow hood with a HEPA H14 filter was purchased yesterday

Okay ramblings everyone's ear off. Requesting off beginning today till more likely Monday to restock Test Cyp all 4 treys, Eq, and Test prop. If we have enough time 100% make the preworkout blend for fun. Of course as well will hangout with my babygirl(daughter) too you guys already know

I'm doing a pre-inspect for flight on the anabolic pigeon. Will check back in soon!

It’s great to see you constantly upgrading the lab! Enjoy the weekend and time off with the daughter.

I will be snagging some pre workout blend once it’s ready

 

[KoreanGuy]

Just switched to oep test worried seeing a lot of the same names that are in defiant pharma thread where I got fake dbol will get blood work in a few weeks

 

[B Ware]

@Photon thank you sir for the comments on my hplc reports. I also want to thank you for taking some hard data on the plastic you discovered in regards to the GCMS report on another vendor

Thank you all Men for all the appreciative words and when we talk about brewing and raw material lord that is something I take to heart. I promise you last night I wasn't watching TV or goofing off. More across the lines of answering emails and helping those that have waited the longest periods on me was the objective last night. Had one client wait on me from a different platform for 7 days, I don't feel good about that. Had to make something happen for that man.

However, I took on too much last night and I'm fatigue not gonna lie to you all and Test Cyp is suffering badly. Eq is looking weak you Men are Savages Animals for the Eq haha love it! Glad it tested well for everyone. I will not gouge the price we will leave it because you Men work with me, my schedule so I will return the favor.

Since volume has picked up, a massive flow hood with a HEPA H14 filter was purchased yesterday, it will have its place in the clean for more glass etc final rinse and last process mainly due to the larger volume at hand. The SOP( Standard Operating Procedure)of work stoppage in my opinion should remain if invoices exceed manpower for the day so we can sustain the quality we have.

Again reminds me of bad history if any of you remember the source Symbiotic I think was the name. The man had all the fine equipment but towards the end when volume was at its peak he made an error that he could not dig himself out. Black charred floaters in many batches multiple times that forced him into early retirement.

I want to stay at ground zero so please don't not hesitate to reach out if there is any error on my behalf or even a hint of it. Objective is to not repeat bad history.

Okay ramblings everyone's ear off. Requesting off beginning today till more likely Monday to restock Test Cyp all 4 treys, Eq, and Test prop. If we have enough time 100% make the preworkout blend for fun. Of course as well will hangout with my babygirl(daughter) too you guys already know

Will show Vets the remaining Batch A6 material so they verify /validate it. Will buy upgraded filters as well and post them. As always Men thank you all for following, listening and working with me. We should discuss what should be next for testing?

I'm doing a pre-inspect for flight on the anabolic pigeon. Will check back in soon!

Congrats on the flow hood. Hope you have some help setting it up. Mine was a bitch and I didn’t. Can’t really ask someone to help you set one up unless you have someone you trust very well. I ended up going to harbor freight and buying a hydraulic lift table to lift the hood/table up to where I could slide the base under it.

Symbiotics would thrive here today. It was different times then. Back when our pitch forks were sharp and this place wasn’t a source board. Sym set the standard for intros and had a stellar lab. I actually based some of my equipment off of referring to his lab pics. Have a few of the bottle top dispensers he has. Suckers aren’t cheap.

Anywho, love brew/equipment talk. Glad to see you thriving here man. I’ll never forget years ago I had a show coming up and simply asked you to make me a mast e/tren e blend and not only did you do it but it tested right on the money my man.

Wish you nothing but the best bud!

 

[Oldhand]

Just switched to oep test worried seeing a lot of the same names that are in defiant pharma thread where I got fake dbol will get blood work in a few weeks

Here we go again!

 

[BigDadd7]

Just switched to oep test worried seeing a lot of the same names that are in defiant pharma thread where I got fake dbol will get blood work in a few weeks

I know it's weird, but I'm actually hoping you get pure estrogen and grow a vagina.

 

[AIRBORNE DADDY]

Here we go again!

So I can disregard the fake dbol comment? The been pinning 500mg test e for 3 weeks and not seeing results type?

 

[Matty_G]

So I can disregard the fake dbol comment? The been pinning 500mg test e for 3 weeks and not seeing results type?

You can disregard anything that clown says

 

[sionnach]

So I can disregard the fake dbol comment? The been pinning 500mg test e for 3 weeks and not seeing results type?

Don't just disregard, hit that ignore button (or the report one)

 

[AIRBORNE DADDY]

You can disregard anything that clown says

Fair enough.... weird cuz I seen he's been here since 2017 and I vaguely recall interacting with him here years ago. The glp1s did nothing for my early alzheimers at 54 apparently...

 

[Tdeck81]

Just switched to oep test worried seeing a lot of the same names that are in defiant pharma thread where I got fake dbol will get blood work in a few weeks