MESO-Rx

Anabolic Steroids

OEP LABS Domestic

CHIEF M said:
nipro needles all thin wall and ultra thin wall will see what the hype is about made from my bro @AllGoodThings
Click to expand...
The hype is real. I always get resistance with the 27ga exels I was using to do IM injections, and switching to using those to draw (I really need to go look at/do some research on vial spikes) and pinning with the fresh 30s is almost disturbingly easy to insert by comparison. Flow is the same for me, but I warm everything a bit anyways.

If I am going to get any discomfort/PIP from an IM injection in my delt, I would usually have it by now, so all is going to plan with the TD500. Looking forward to that testing and release!
anthony-adams-rubbing-hands-together-spice-adams.gif
 
AllbrandNew said:
The hype is real. I always get resistance with the 27ga exels I was using to do IM injections, and switching to using those to draw (I really need to go look at/do some research on vial spikes) and pinning with the fresh 30s is almost disturbingly easy to insert by comparison. Flow is the same for me, but I warm everything a bit anyways.

If I am going to get any discomfort/PIP from an IM injection in my delt, I would usually have it by now, so all is going to plan with the TD500. Looking forward to that testing and release!
anthony-adams-rubbing-hands-together-spice-adams.gif
Click to expand...
I mentioned vial spikes in another thread and pretty much came up as a no go for oil it’s leaches from the BA
 
Photon said:
Do you backfill your syringes?
I feel like there's a huge difference in sharpness after using 31g to draw from thick stoppers. Most of them end up bending too when pinning..

I now use 30g 1/2 and only push 1/2 way in if i want to do subq.
Click to expand...
Been using B-D and they stay sharp, so haven’t felt need to back fill. That’s with pulling oil from 4-5 different vials sometimes too. I have had some cheaper needles that seem to go dull after the first stick into a stopper.

Are you actually backfilling or swapping Luer lock needles between loading and injecting? Whenever I have tried to backfill oil with an insulin pin some or most of the oil tends to overflow the barrel instead of drip down. Obviously just swapping the needle avoids that but a little oil tends to be left behind with Luer locks, probably not significant unless injection volumes are extremely low.
 
bigdaddyandfriends said:
Been using B-D and they stay sharp, so haven’t felt need to back fill. That’s will pulling oil from 4-5 different vials sometimes too. I have had some cheaper needles that seem to go dull after first stick into a stopper.

Are you using Luer lock needles/syringes for backfilling? Whenever I have tried to backfill oil with an insulin pin some of the oil tends to overflow the barrel instead of drip down. Obviously just swapping the needle avoids that but a little oil tends to be left behind with Luer locks, but probably if no significant unless injection volumes are extremely low.
Click to expand...

I backfill via a 27g if i have to, into a smaller gauge syringe, both insulin syringes.
I use easytouch and most of my needles end up bent for 31g lol...
I might pickup some 30g 5/16 .5ml syringes for subq shots...
 
Photon said:
I backfill via a 27g if i have to, into a smaller gauge syringe, both insulin syringes.
I use easytouch and most of my needles end up bent for 31g lol...
I might pickup some 30g 5/16 .5ml syringes for subq shots...
Click to expand...
Yes I had some 1/2” Easy Touch 28g and they would bend too. That’s why I just buy B-D now; total diabetes supply sells #90 boxes for $26 which is fairly cheap, and sometimes I can get a 10% coupon to work too, and I can charge them to my FSA.

Have not tried Nipro but might order some to try out.
 
bigdaddyandfriends said:
Yes I had some 1/2” Easy Touch 28g and they would bend too. That’s why I just buy B-D now; total diabetes supply sells #90 boxes for $26 which is fairly cheap, and sometimes I can get a 10% coupon to work too, and I can charge them to my FSA.

Have not tried Nipro but might order some to try out.
Click to expand...
FSA is life I use it for my trt clinic to get anavar and winny and some other pharma stuff
 
Ateam2023 said:
Were those the type of vial spikes with a filter?
Click to expand...
If you search there is a large thread showing them fail in BA (or BB?)

Maybe you've already seen it.

Found it
immatty

Thread 'Multidose Vial Adapter'

Just posting this here in case it helps anyone.

I found this Vial Adapter which I expect will help me reduce the number of drawing needles and improve dose measurement (specially when mixing oils). Once placed in your vial, you basically connect your luer lock syringe and draw as needed. If you're interested, search for 'Multidose Vial Adapter', there are also a few videos on how it works which made me give it a try. For your reference, I'm in the US and got 6 of them for around 20 bucks, shipping included.
  • Like
 
newguy2 said:
If you search there is a large thread showing them fail in BA (or BB?)

Maybe you've already seen it.

Found it
immatty

Thread 'Multidose Vial Adapter'

Just posting this here in case it helps anyone.

I found this Vial Adapter which I expect will help me reduce the number of drawing needles and improve dose measurement (specially when mixing oils). Once placed in your vial, you basically connect your luer lock syringe and draw as needed. If you're interested, search for 'Multidose Vial Adapter', there are also a few videos on how it works which made me give it a try. For your reference, I'm in the US and got 6 of them for around 20 bucks, shipping included.
  • Like
Click to expand...

CHIEF M said:
I mentioned vial spikes in another thread and pretty much came up as a no go for oil it’s leaches from the BA
Click to expand...

Damn, glad I didn't FOMO into that.. assuming whatever leaches is toxic (probably a big assumption; probably unfounded but whatevs)
 
newguy2 said:
A big assumption really? I'd see it from the other side, I mean how could it not be. Is it organic material?
Click to expand...

These things have been around for a pretty long time and no consistent/systematic complaints, so.... Idk, maybe it's one of those things that after 30 years of using them, you'll get achy joints or forget where you put your keys (ie, could be normal aging or very slow-acting BB-leached toxins that could've been avoided)
 
i think i will continue to use my vial adapters from mls, no way of telling if it leaches , i guess this will go under my "no filtering hgh threshold" as far as "idgas status" Ymmv
 
RockyP said:
@OEP LABS Sir - any thought about how the first batch of Test D will be rationed? 1 to 2 vials per client?
Click to expand...

Yessir I have been asked this and I'm also having a hard time finding a nuetral number for all. I did make a 7% to 8% tolerance in reduction when synthesizing the Test Decanoate. Which decreases the amount that will be available to about roughly 115-120.

What does the community think is fair for all?

4-5 per member?

7 per member?
 
You must log in or register to reply here.

Similar threads

Venom Lab
Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic
24 25 26
Replies
507
Views
39K
Ruru_Teh_seks
Ruru_Teh_seks
Defiant Pharma
Defiant Pharma (US Domestic)
61 62 63
Replies
1K
Views
73K
RockyP
RockyP
O
Sterilizing syringe filters?
Replies
4
Views
459
Sera
S
VIncentt3q
Sterility
2
Replies
36
Views
2K
Gonz0
Gonz0
AllGoodThings
Transferring oils for long term storage
5 6 7
Replies
129
Views
8K
AllGoodThings
AllGoodThings

Sponsors

Latest posts

Back
Top