An Individual Mans Brew Log (Castor propaganda) (and pleas for help/advice)

[Sampei]

You will probably hate me for asking, but did you ever do the math how many grams of raws you use for 1g of disolved steroid in your oils?
So my question is, how much do you waste by experimenting, spilling, etc.?
Do you salved batches by diluting them, etc. or do you just bin them?

I thought about brewing, when I started again with gear a few years ago, but then figured I would probably blow through quite a bit more raws than what I end up with as final product.

The only things that are hard to brew are the one that don't cost much and you can throw away easily experimenting with it. I'm brewing Winstrol right now and I have thrown away already 6 batches but I mean it's 1.5-1.8gr each batch. Who give a fuck xD

 

[IndividualMan]

You don't need guiacol, the problem is finding the way to make it without PIP.

i need the mild localized nerve damage for no pip : (

 

[IndividualMan]

1.5-1.8gr

thats 4-6 dollars per batch, my good sir. how dare you joke about such wasteful handling of this expensive material

 

[Photon]

SUPERDROL 30mg/ml is super easy to do instead. It's very funny how some orals are fucked up to brew and some other are super easy

Check the melting points
Adrol dbol sdrol have low melting points, holds easily at 50mg/ml.

Tbol var winy halo TNE TRBE have high melting points, almost all uses G.
I got a hunch anything that uses G will do well with high BA.

 

[Sampei]

Check the melting points
Adrol dbol sdrol have low melting points, holds easily at 50mg/ml.

Tbol var winy halo TNE TRBE have high melting points, almost all uses G.
I got a hunch anything that uses G will do well with high BA.

TNE 100mg Is super Easy to do tho compared to Winny and the PIP is nothing compared to motherfucking Winstrol.

God I have this fucking shoulder that is a rock lol

 

[Photon]

TNE 100mg Is super Easy to do tho compared to Winny and the PIP is nothing compared to motherfucking Winstrol.

God I have this fucking shoulder that is a rock lol

Do you feel like there's more resistance the more u inject the winny? I have mtren that gets harder to push the more I inject..I got a feeling it's crashing somehow when mixed with blood..

 

[Sampei]

Do you feel like there's more resistance the more u inject the winny? I have mtren that gets harder to push the more I inject..I got a feeling it's crashing somehow when mixed with blood..

I have injected only twice and I fucked up already two spots so I didn't really pay too much attention at first, I'm waiting for my spot to recover to try the new recipes lol

 

[Sampei]

Anyone of you as injected standard Winstrol 50mg with guiacol? Is it pippy too? I just don't understand if it's pippy because Winstrol it's pippy nl matter what at 50mg/ml or it's pippy because of some other reasons like all the solvents I need to use for example or because it doesn't hold as well as with guiacol

 

[IndividualMan]

Anyone of you as injected standard Winstrol 50mg with guiacol? Is it pippy too? I just don't understand if it's pippy because Winstrol it's pippy nl matter what at 50mg/ml or it's pippy because of some other reasons like all the solvents I need to use for example or because it doesn't hold as well as with guiacol

once tried some 7%G Winstrol, 50mg/ml. around 4 months ish ago (just fucking around with new stuff, trying it out for 1-2 days each), the G decreases the starting PIP, and PIP also does not last as long as it normally would.
I really dont get how people can just tough out winstrol injection solutions.
It is just so pippy.
I do not like G, personally, it damages tissue, nerves, stinks up the whole place, etc. but i get how some people use it for looong periods of time without knowing that it fucks up their health, it is just too convenient.

 

[Sampei]

once tried some 7%G Winstrol, 50mg/ml. around 4 months ish ago (just fucking around with new stuff, trying it out for 1-2 days each), the G decreases the starting PIP, and PIP also does not last as long as it normally would.
I really dont get how people can just tough out winstrol injection solutions.
It is just so pippy.
I do not like G, personally, it damages tissue, nerves, stinks up the whole place, etc. but i get how some people use it for looong periods of time without knowing that it fucks up their health, it is just too convenient.

Yeah I ain't using G no matter what, I prefer to not use Winstrol injectable or use it at 25mg/ml if it's needed but no way I'm using that toxic shit of G

 

[narta]

Add some local anesthetic and pip will be minimal. I started adding 5% in my oral inj experiments and voila, minimal pip even with "pippy" shit

Now I just need my guinea pig to use the Suicide Blend, so I can recuperate some money for my troubles

 

[Sampei]

Add some local anesthetic and pip will be minimal. I started adding 5% in my oral inj experiments and voila, minimal pip even with "pippy" shit

Now I just need my guinea pig to use the Suicide Blend, so I can recuperate some money for my troubles

I tried with the one you use, didn't do much for the long term pip xD
No pip while injecting but later on can't escape the bad pip that some substances give for different reasons. Maybe lidocaine?

 

[Para_33]

Is tne easier than tren no ester in oil? Tren no ester didn’t disolve at all even all the way down at 10mg/ml and the raws are dark brown. Not sure if that’s normal or if that’s the problem

 

[IndividualMan]

Is tne easier than tren no ester in oil? Tren no ester didn’t disolve at all even all the way down at 10mg/ml and the raws are dark brown. Not sure if that’s normal or if that’s the problem

did you get it tested? TrNE usually need a good bit more solvents, (BA mainly, upwards of4-5%, but also BB) but 25mg/ml with other stuff mixed in at reasonable quantities usually holds well. You do need a relatively high temp for TrNe tho, (not too high tho, dont want the oil to reach smoke point or the raws to get crispy brown)

 

[Photon]

Is tne easier than tren no ester in oil? Tren no ester didn’t disolve at all even all the way down at 10mg/ml and the raws are dark brown. Not sure if that’s normal or if that’s the problem

Your raws are the problem.

Both are done the same way.
No G needed.

Janoshik Analytical

I gave up on using it, the tren cough is ridiculous.

 

[Photon]

Add some local anesthetic and pip will be minimal. I started adding 5% in my oral inj experiments and voila, minimal pip even with "pippy" shit

Now I just need my guinea pig to use the Suicide Blend, so I can recuperate some money for my troubles

Isn't that alot?
Ive only seen up to 2% lido for most injectables.

Some compounds only PIP a day or two after, i believe those are due to crashing of some sort in the muscle. Usually i add more solvents for those.

 

[Para_33]

did you get it tested? TrNE usually need a good bit more solvents, (BA mainly, upwards of4-5%, but also BB) but 25mg/ml with other stuff mixed in at reasonable quantities usually holds well. You do need a relatively high temp for TrNe tho, (not too high tho, dont want the oil to reach smoke point or the raws to get crispy brown)

I did not get it tested, but I will. Have you ever seen or know from experience if tren base is a dark brown powder? I’ve never seen anything this bad of a color.

Also what color should tren no ester in oil be ?

I managed to get some to dissolve enough to turn the EO a deep reddish color. But since it wasn’t dissolving and it was clear even as I started at 20%bb|1.5%Ba, at 155f nothing, 165f nothing. Add more BB to probably 30% I know it’s a big jump but I could tell it wasn’t working out so just wanted to see if it would finally dissolve. Nothing happened.

Then I’m like given up at this point so just for kicks went to 180f and even then not much aside from the raw not looking like powder swirling around but began to get tacky and dark brown/black clumps. I’d say only maybe 10% absolute max of the raws dissolved. And I started with the goal of it being 10mg/ml or something really low. I’m going from memory so I forget the exact numbers. I just know it was a sound procedure design, that’s worked for me before and this was the only thing out of dozens of combinations that didn’t work even the slightest. Like dht base in oil was tough and would crash a lot in GSO with 25% BB, but this was like there was something wrong with it probably heavily oxidized- but I’m not a knowledgeable chemist, so no idea.

 

[Sampei]

I did not get it tested, but I will. Have you ever seen or know from experience if tren base is a dark brown powder? I’ve never seen anything this bad of a color.

Also what color should tren no ester in oil be ?

I managed to get some to dissolve enough to turn the EO a deep reddish color. But since it wasn’t dissolving and it was clear even as I started at 20%bb|1.5%Ba, at 155f nothing, 165f nothing. Add more BB to probably 30% I know it’s a big jump but I could tell it wasn’t working out so just wanted to see if it would finally dissolve. Nothing happened.

Then I’m like given up at this point so just for kicks went to 180f and even then not much aside from the raw not looking like powder swirling around but began to get tacky and dark brown/black clumps. I’d say only maybe 10% absolute max of the raws dissolved. And I started with the goal of it being 10mg/ml or something really low. I’m going from memory so I forget the exact numbers. I just know it was a sound procedure design, that’s worked for me before and this was the only thing out of dozens of combinations that didn’t work even the slightest. Like dht base in oil was tough and would crash a lot in GSO with 25% BB, but this was like there was something wrong with it probably heavily oxidized- but I’m not a knowledgeable chemist, so no idea.

maybe it's not even trenbase lol you can't properly brew without testing the raw

 

[Photon]

I did not get it tested, but I will. Have you ever seen or know from experience if tren base is a dark brown powder? I’ve never seen anything this bad of a color.

Also what color should tren no ester in oil be ?

I managed to get some to dissolve enough to turn the EO a deep reddish color. But since it wasn’t dissolving and it was clear even as I started at 20%bb|1.5%Ba, at 155f nothing, 165f nothing. Add more BB to probably 30% I know it’s a big jump but I could tell it wasn’t working out so just wanted to see if it would finally dissolve. Nothing happened.

Then I’m like given up at this point so just for kicks went to 180f and even then not much aside from the raw not looking like powder swirling around but began to get tacky and dark brown/black clumps. I’d say only maybe 10% absolute max of the raws dissolved. And I started with the goal of it being 10mg/ml or something really low. I’m going from memory so I forget the exact numbers. I just know it was a sound procedure design, that’s worked for me before and this was the only thing out of dozens of combinations that didn’t work even the slightest. Like dht base in oil was tough and would crash a lot in GSO with 25% BB, but this was like there was something wrong with it probably heavily oxidized- but I’m not a knowledgeable chemist, so no idea.

I believe yours is bunk.
It's supposed to be yellow.

Oil pics in report.

Janoshik Analytical

 

[Zebedee]

Brewed some Proviron/TNE/Exemestane.
allegedly pinned some as well.
Proviron 5mg/ml
TNE 50mg/ml
Exemestane 3mg/ml
7%Ba
35%BB
Castor Oil (obviously)
feels great, but i should stop brewing so many different things so quickly. takes the excitement out of it, like infinite money cheats in a video game.

How would you compare injectable proviron to oral, eg 5mg injectable ~ 50mg oral, just as an example?

Obviously this is the extremely subjective & that’s before you even attempt to factor in the other compounds you’re using etc etc ….

Just curious on your thoughts here mate.