HYB Test 600, JY Pharma 24iu GH results

[ChemBB]

Sharing here in case anyone else has these items.

Protocol for T600 is 180mg E3D, the blend is:
- Test Acetate 180mg
- Test Phenylpropionate 220mg
- Test Cypionate 200mg

(Note: This is the same composition of the T600 sold by Hepius/Stromusc)

Bloods were drawn ~48 hours after last pin (so Ace/PP esters would have been low)


GH results, protocol was 10iu IM in delt, 3 hours before blood draw:


Curiously, my IGF-1 levels are very low. Just in case anyone else in the future tests only IGF-1 and thinks their GH might be bunk...

 

[JK1]

Sharing here in case anyone else has these items.

Protocol for T600 is 180mg E3D, the blend is:
- Test Acetate 180mg
- Test Phenylpropionate 220mg
- Test Cypionate 200mg

(Note: This is the same composition of the T600 sold by Hepius/Stromusc)

Bloods were drawn ~48 hours after last pin (so Ace/PP esters would have been low)
View attachment 348547

GH results, protocol was 10iu IM in delt, 3 hours before blood draw:
View attachment 348548

Curiously, my IGF-1 levels are very low. Just in case anyone else in the future tests only IGF-1 and thinks their GH might be bunk...
View attachment 348549

Did you use the t600 as is or did you dilute it?

Much pip?

 

[ChemBB]

Did you use the t600 as is or did you dilute it?

Much pip?

It's the most painful thing I've ever injected, horrible blend idea

I've been diluting in EO

 

[IndividualMan]

180 mg Test ace/ml alone makes any sane person wanna chop their dick off.
220mg Phenylpropionate? same story.
and then 200mg cap to bring the concentration to 600mgs.
Gotta be some evil person coming up with these mixes, man.

 

[JK1]

It's the most painful thing I've ever injected, horrible blend idea

I've been diluting in EO

That made me laugh, for some reason I thought you were going to say it wasn't too bad or something like that.

Surely no one is taking it undiluted?

Thes high conc oils interest me. Obviously better value for money but trade off with solvents and pip.

Had any experience with supertest 450?

Is EO the only thing you've used as a diluent?

 

[JK1]

180 mg Test ace/ml alone makes any sane person wanna chop their dick off.
220mg Phenylpropionate? same story.
and then 200mg cap to bring the concentration to 600mgs.
Gotta be some evil person coming up with these mixes, man.

Whats the thinking behind it?

 

[DraxTheDestroyer]

Jesus?! 180mg of Test Ace!?? Yikes

 

[ChemBB]

Surely no one is taking it undiluted?

I took it undiluted for a few pins

One SC pin my stomach became so inflamed it got infected + I had to go to ER for antibiotics

Another pin in my quad made it swell up the size of a watermelon

Learned my lesson lol...

I'm like 90% of the way through the first vial, and then I'm swapping to JY Pharma 300 Enan + 300 Cyp blend.

I'm not gonna toss this batch of 600 because technically, it's perfectly good gear, but goddamn I do not want to pin it unless it's the only thing I have LOL

Post in thread 'HYB (Best Service and Product - International Shipping)'

Aug 2, 2025

I think the T600 is more meant for SC injections.
0,3 ml S.C. E2d will certainly work well.

Funny you say that -- I've been pinning SC in stomach with 29g slin pins for years

SC injection of this T600 made the pin site so inflamed that it got infected and I had to stay in the hospital overnight for IV antibiotics

There is still purple bruising/discoloration and slight swelling (see pics below)

I tried pinning it IM in glutes, then lastly quads. It made both of them swell up the size of a watermelon for a week -- I can barely walk right now lol

Pics of SC pin site + quad PIP...

• ChemBB

• 
• 

 

[Photon]

the blend is:
- Test Acetate 180mg
- Test Phenylpropionate 220mg
- Test Cypionate 200mg

I'm not sure what they were thinking of when they did this blend lol

 

[ChemBB]

I'm not sure what they were thinking of when they did this blend lol

Chinese rep who finally had enough of being asked "dO yOU hAvE tRacKinG yEt???"

 

[ChemBB]

Also, I'm getting bloods again tomorrow to check lipids so and it's cheap enough I added Testosterone again

So in a few days I can post a 2nd measurement

This time I'm going to pin 90mg a few hours before the draw, will be curious how the numbers differ.

 

[newguy2]

I took it undiluted for a few pins

One SC pin my stomach became so inflamed it got infected + I had to go to ER for antibiotics

Another pin in my quad made it swell up the size of a watermelon

Learned my lesson lol...

I'm like 90% of the way through the first vial, and then I'm swapping to JY Pharma 300 Enan + 300 Cyp blend.

I'm not gonna toss this batch of 600 because technically, it's perfectly good gear, but goddamn I do not want to pin it unless it's the only thing I have LOL

Post in thread 'HYB (Best Service and Product - International Shipping)'

Aug 2, 2025

I think the T600 is more meant for SC injections.
0,3 ml S.C. E2d will certainly work well.

Funny you say that -- I've been pinning SC in stomach with 29g slin pins for years

SC injection of this T600 made the pin site so inflamed that it got infected and I had to stay in the hospital overnight for IV antibiotics

There is still purple bruising/discoloration and slight swelling (see pics below)

I tried pinning it IM in glutes, then lastly quads. It made both of them swell up the size of a watermelon for a week -- I can barely walk right now lol

Pics of SC pin site + quad PIP...

• ChemBB

• 
• 

View attachment 351863

180mg subq huh. That's a big one. Dang man that leg looks gnarly.

 

[JK1]

I took it undiluted for a few pins

One SC pin my stomach became so inflamed it got infected + I had to go to ER for antibiotics

Another pin in my quad made it swell up the size of a watermelon

Learned my lesson lol...

I'm like 90% of the way through the first vial, and then I'm swapping to JY Pharma 300 Enan + 300 Cyp blend.

I'm not gonna toss this batch of 600 because technically, it's perfectly good gear, but goddamn I do not want to pin it unless it's the only thing I have LOL

Post in thread 'HYB (Best Service and Product - International Shipping)'

Aug 2, 2025

I think the T600 is more meant for SC injections.
0,3 ml S.C. E2d will certainly work well.

Funny you say that -- I've been pinning SC in stomach with 29g slin pins for years

SC injection of this T600 made the pin site so inflamed that it got infected and I had to stay in the hospital overnight for IV antibiotics

There is still purple bruising/discoloration and slight swelling (see pics below)

I tried pinning it IM in glutes, then lastly quads. It made both of them swell up the size of a watermelon for a week -- I can barely walk right now lol

Pics of SC pin site + quad PIP...

• ChemBB

• 
• 

View attachment 351863

Holy shit.

Ok, well, granted absolutely no one wants this to happen, and some might be ok with higher conc and testing it...you've just made up my mind on never trying anything over 300mg/ml test ( assuming the likes of EQ and deca are ok at higher conc). Infections and and 'watermelon' sized swelling (not your regular orange size)...not for the faint hearted.

 

[Eddie.]

@ChemBB that looks nasty my friend! How much oil volume did you pinned subc and caused you to take antibiotics?

I have a test D400 kit which is brewed with a little oxidised raws and IM it just stings like mofo. Generally i tolerate very well all sorts of oil subc, I'm thinking to give it a go before i throw it in the trash.. Months ago it would have been there from day one, now given the situation i kept it in case of making it work somehow.

 

[ChemBB]

Thes high conc oils interest me. Obviously better value for money but trade off with solvents and pip.

RE: Solvents and PIP, please see longer explanation at bottom of post in response to this common misconception

Had any experience with supertest 450?

I have some Hepius S450 from WWB I plan on running eventually, but I'm going to use JY Pharma T600 (E300/C300) before that.

Is EO the only thing you've used as a diluent?

Aye, as it's the thinnest carrier and this stuck is THICK like fucking syrup.

180mg subq huh. That's a big one.

I've done hundreds of mg SubQ regularly w/o issue, it's just this particular blend (more specifically, the 180mg Test Ace)

you've just made up my mind on never trying anything over 300mg/ml test

I have a test D400 kit which is brewed with a little oxidised raws and IM it just stings like mofo. Generally i tolerate very well all sorts of oil subc, I'm thinking to give it a go before i throw it in the trash..

I'd actually really encourage people to use high-dose blends.
There are two reasons for this:

1) Generally they are cheaper than their individual constituents. For example I was getting Tren E 250 + Mast E 250 blends for like 40% cheaper than buying them separately.

2) The way that PIP works from blends, is it's based on the individual concentrations.

The tl;dr = crystals are made of SINGLE molecules. You can't have a crystal of Test + Tren molecules weaved together, for instance.

What happens is that, a compound in a blend is brewed near the limit before it would crash + crystallize in the vial.

So it holds fine in the oil, but when you pin it, the solvents like BA/BB/EO start to leach outwards into the watery fluid in your muscles ("aqeuous interstitial fluid").

This causes dilution and the compound drops below its (now lower) saturation point, crashing inside your muscle and the micro-needles from the crystals creating irritation/inflammation

Please excuse the AI generated image, but I'm not an artist and it gets the point across:

 

[JK1]

Thanks. I get the cost thing.

I need to understand the number 2 reason more when I have time to take it in. Is that supposed to be a reason to use high conc oils?

 

[ChemBB]

Thanks. I get the cost thing.

I need to understand the number 2 reason more when I have time to take it in. Is that supposed to be a reason to use high conc oils?

I made a whole post discussing high-dose blends, and how multi-compound solubility + PIP works

Lots of myths/misconceptions about these

Thread 'Mythbusters #1: High Dose Blends: PIP + Solubility'

Oct 1, 2025

Welcome to the "Mythbusters" Series: Discussing common misconceptions/folklore about AAS!

---

In this first edition, we're tackling high-concentration steroid blends and the infamous PIP. We will cover:

• How solubility and crystallization actually work.
• Why a well-formulated blend isn't the problem.
• What really causes high-dose blends to "crash" in the muscle.

---

One of the biggest myths in this space is that high-dose blends are inherently more painful than their individual components.
This is fundamentally incorrect. Let's...

• ChemBB
• Replies: 28
• Forum: Steroid Forum

• 
• 

 

[JK1]

I made a whole post discussing high-dose blends, and how multi-compound solubility + PIP works

Lots of myths/misconceptions about these

Thread 'Mythbusters #1: High Dose Blends: PIP + Solubility'

Oct 1, 2025

Welcome to the "Mythbusters" Series: Discussing common misconceptions/folklore about AAS!

---

In this first edition, we're tackling high-concentration steroid blends and the infamous PIP. We will cover:

• How solubility and crystallization actually work.
• Why a well-formulated blend isn't the problem.
• What really causes high-dose blends to "crash" in the muscle.

---

One of the biggest myths in this space is that high-dose blends are inherently more painful than their individual components.
This is fundamentally incorrect. Let's...

• ChemBB
• Replies: 28
• Forum: Steroid Forum

• 
• 

Thanks i'll check it out

 

[ChemBB]

This GH is GARBAGE. I had a SECOND person get a GH blood test after pinning 10iu IM, hoping that my results were unusually low due to something wrong with ME

$300 down the drain...

 

[Ryobi]

Jano test of the actual GH would’ve been better than igf1 test