MESO-Rx Sponsor Primal Pharma - US Domestic

Considering that one dude using the T400 Cyp I figured I’d come on here and share.

I ordered some T500 Ent, just to have possibly for upcoming cycle and volume control. I’ve used high concentrations before and generally don’t get too bad of pip.

I’m not ready to blast but after that other dudes mango I figured I’d give a test run to figure out if I was gonna keep it, filter it or ditch it.

I use a 29 gauge 1/2inch needle on a 1ml barrel. Right quad.

I heated up the vial prior to drawing, 1/2cc. DISCLAIMER I DID MIX IT WIRH 1/2cc of GA Test E 300. My thought was I would never be injecting the 500 by itself so I wanted to gauge where I’d be.

I am almost at the 48 hour mark since injecting. Day of: no PIP.
Yesterday day one, no significant pip, didn’t feel it getting up and down out of chair. Really only time I felt it was when I would think about it and when I squatted to put air in my tire. Today day 2, still no pip.

Again I have never been sensitive to high concentrations or any compounds with PIP but just figured I’d share. Will probably grab a few more for the next blast so I can keep it to 4 pins a week.
 
The free market is a beautiful thing. There’s always going to be cheap bullshit being produced and people willing to buy it. Same goes for higher end products, and everything in between.

I’m no veteran in this space, and am always open to the possibility that I am dumb. But it seems the ecosystem functions pretty well to allow people to make somewhat informed decisions about what they’re injecting. There’s a huge market for people to deal in cheap bullshit. McDonald’s, Kia, and mgk are all killing it. Im not sure that should be a sign of defeat for people who enjoy quality products.

I lack the knowledge and experience to do what Mr. Readalot and others do, and I commend them for it. It’s a morally good thing. Could they be spinning their wheels? Possibly. But as an example, if a source begins testing raws because of the work of users here and that prevents a batch of talcum powder enanthate from being sold to 100s of people then those users did a good thing that had a positive real world impact.

That’s just my cent and a half, now call me dumb.
 
The free market is a beautiful thing. There’s always going to be cheap bullshit being produced and people willing to buy it. Same goes for higher end products, and everything in between.

I’m no veteran in this space, and am always open to the possibility that I am dumb. But it seems the ecosystem functions pretty well to allow people to make somewhat informed decisions about what they’re injecting. There’s a huge market for people to deal in cheap bullshit. McDonald’s, Kia, and mgk are all killing it. Im not sure that should be a sign of defeat for people who enjoy quality products.

I lack the knowledge and experience to do what Mr. Readalot and others do, and I commend them for it. It’s a morally good thing. Could they be spinning their wheels? Possibly. But as an example, if a source begins testing raws because of the work of users here and that prevents a batch of talcum powder enanthate from being sold to 100s of people then those users did a good thing that had a positive real world impact.

That’s just my cent and a half, now call me dumb.
I'm getting close to making a batch of "TEST YOUR RAWS" tank tops...
 
The free market is a beautiful thing. There’s always going to be cheap bullshit being produced and people willing to buy it. Same goes for higher end products, and everything in between.

I’m no veteran in this space, and am always open to the possibility that I am dumb. But it seems the ecosystem functions pretty well to allow people to make somewhat informed decisions about what they’re injecting. There’s a huge market for people to deal in cheap bullshit. McDonald’s, Kia, and mgk are all killing it. Im not sure that should be a sign of defeat for people who enjoy quality products.

I lack the knowledge and experience to do what Mr. Readalot and others do, and I commend them for it. It’s a morally good thing. Could they be spinning their wheels? Possibly. But as an example, if a source begins testing raws because of the work of users here and that prevents a batch of talcum powder enanthate from being sold to 100s of people then those users did a good thing that had a positive real world impact.

That’s just my cent and a half, now call me dumb.
Great word
 
Considering that one dude using the T400 Cyp I figured I’d come on here and share.

I ordered some T500 Ent, just to have possibly for upcoming cycle and volume control. I’ve used high concentrations before and generally don’t get too bad of pip.

I’m not ready to blast but after that other dudes mango I figured I’d give a test run to figure out if I was gonna keep it, filter it or ditch it.

I use a 29 gauge 1/2inch needle on a 1ml barrel. Right quad.

I heated up the vial prior to drawing, 1/2cc. DISCLAIMER I DID MIX IT WIRH 1/2cc of GA Test E 300. My thought was I would never be injecting the 500 by itself so I wanted to gauge where I’d be.

I am almost at the 48 hour mark since injecting. Day of: no PIP.
Yesterday day one, no significant pip, didn’t feel it getting up and down out of chair. Really only time I felt it was when I would think about it and when I squatted to put air in my tire. Today day 2, still no pip.

Again I have never been sensitive to high concentrations or any compounds with PIP but just figured I’d share. Will probably grab a few more for the next blast so I can keep it to 4 pins a week.
Thank you for sharing this. I start the TE500 on Monday and was wondering about pip. I’ll update too but this is a good sign.
 
I honestly cannot believe they sell shirts like these.
View attachment 339597
I would have to grow a real pair before I could earn the right to wear something like that. Baby steps.

Bill Murray Nw GIF
 

Sponsors

Latest posts

Back
Top