Brew cyp at 20bb and 1.5ba MTC and doesn’t crash in the fridge after a week (for testing purposes)…..
MESO-Rx
Anabolic Steroids
MESO-Rx Sponsor Genuine Steroid Powder Manufacturer-AASraw
- Thread starter AASraw
- Start date
What high quality steroid powders do you have in stock then? Any test, nandrolone?
Hello everyone,
We expand our peptides products, many hot sell peptides are on sale and in stock. Welcome to contact us for updated prices.
New products
HGH fragment 5mg
MGF
KPV
PE-22-88 5mg
We expand our peptides products, many hot sell peptides are on sale and in stock. Welcome to contact us for updated prices.
New products
HGH fragment 5mg
MGF
KPV
PE-22-88 5mg
HGH vs. HGH Fragment vs. AOD-9604
HGH (Somatropin)
Full-length growth hormone – 191 amino acids
Stimulates IGF-1 for broad growth, recovery, and metabolic support
Used in research on muscle growth, anti-aging, and fat loss
Increases lean mass and can promote water retention in models
HGH Fragment (176-191)
Tail-end segment of HGH – targets fat loss directly
Boosts lipolysis without the broad effects of full-length HGH
No significant insulin resistance in lab scenarios
Often studied for “dry” lean mass retention and cutting phases
AOD-9604
Synthetic peptide derivative of HGH Fragment
Refined for pure fat-burning activity
No impact on IGF-1 or growth pathways – purely metabolic
Research focuses on obesity models and metabolic health
What are they used for (in research)?
- HGH (Somatropin) – Full-body muscle growth, tissue healing, performance longevity
- HGH Fragment (176-191) – Fat loss with lean muscle preservation
- AOD-9604 – Targeted adipose tissue breakdown in metabolic and obesity models
HGH (Somatropin)Full-length growth hormone – 191 amino acids
Stimulates IGF-1 for broad growth, recovery, and metabolic support
Used in research on muscle growth, anti-aging, and fat loss
Increases lean mass and can promote water retention in models
HGH Fragment (176-191)Tail-end segment of HGH – targets fat loss directly
Boosts lipolysis without the broad effects of full-length HGH
No significant insulin resistance in lab scenarios
Often studied for “dry” lean mass retention and cutting phases
AOD-9604Synthetic peptide derivative of HGH Fragment
Refined for pure fat-burning activity
No impact on IGF-1 or growth pathways – purely metabolic
Research focuses on obesity models and metabolic health
What are they used for (in research)?
- HGH (Somatropin) – Full-body muscle growth, tissue healing, performance longevity
- HGH Fragment (176-191) – Fat loss with lean muscle preservation
- AOD-9604 – Targeted adipose tissue breakdown in metabolic and obesity models
Last edited:
Rakusa
Member
When will you stock test e or similar?
Bizzark1
Member
HGH vs. HGH Fragment vs. AOD-9604
Full-length growth hormone – 191 amino acids
Stimulates IGF-1 for broad growth, recovery, and metabolic support
Used in research on muscle growth, anti-aging, and fat loss
Increases lean mass and can promote water retention in models
Tail-end segment of HGH – targets fat loss directly
Boosts lipolysis without the broad effects of full-length HGH
No significant insulin resistance in lab scenarios
Often studied for “dry” lean mass retention and cutting phases
Synthetic peptide derivative of HGH Fragment
Refined for pure fat-burning activity
No impact on IGF-1 or growth pathways – purely metabolic
Research focuses on obesity models and metabolic health
What are they used for (in research)?
- HGH (Somatropin) – Full-body muscle growth, tissue healing, performance longevity
- HGH Fragment (176-191) – Fat loss with lean muscle preservation
- AOD-9604 – Targeted adipose tissue breakdown in metabolic and obesity models
First useful post youve ever made
falconpharmalabs
Subscriber
Why did you cross out what it is, lol You know that's what everybody wants to actually find out! They want to know what that s*** was and if it was any good, You gotta tell us more than that man.
Photon
Member
What did you buy?
Hell if I didn't know any better It might be a bag of cake batter,lol. Talk about leaving a guy in suspense.
trismegistus
Member
When i asked last week all they had was TNE, don't know if they have any 19nors or dhts or orals
falconpharmalabs
Subscriber
Some test isocaproate...
falconpharmalabs
Subscriber
Hahaha
Fast and Good delivery as usual
United States, UK, Australia, Brazil, Russia and All European countries.
3-18 working days ETA depending on delivery method.
United States, UK, Australia, Brazil, Russia and All European countries.
3-18 working days ETA depending on delivery method.
Melting point of products below
Oxymetholone: 178–180°C
Testosterone Isocaproate: 52–54°C
Testosterone Phenylpropionate: 112–117°C
Testosterone Enanthate: 34–39°C
Nandrolone Decanoate (Deca): 33–37°C
Nandrolone Phenylpropionate: 93–99°C
Why Melting Point Matters in Gear Preparation
As a bodybuilder, if you care about smooth injections, stable vials, and pain-free cycles, melting point is one of the key chemical properties to know — especially if you’re brewing or sourcing underground.
1.Solubility in Oil
Lower melting point = easier to dissolve in carrier oils like MCT, GSO, or EO.
Example: Test E (MP ~34°C) melts like butter — very easy to work with at low temps.
High MP esters like TPP (~115°C) or NPP (~95°C) need more heat to fully dissolve and stay stable.
2.Crash Risk
Ever had a vial crystalize or get cloudy in the fridge or winter? That’s the compound crashing out of solution.
Compounds with high melting points + high doses + poor solvents = crash city.
Avoid this by knowing the MP and adjusting oil type, solvent ratios (BB/BA), and brewing temp.
3.Filtering Temps
High MP compounds need to stay warm during filtering (0.22 μm sterile filter), or they’ll clog the filter or crash mid-process.
You’ll lose product and clog filters = wasted time and money.
4. Injection Pain & PIP
If your brew isn’t fully dissolved, microcrystals form in muscle tissue = post-injection pain (PIP) or even sterile abscess.
High MP compounds are more prone to this if underdosed, under-heated, or made with weak solvents.
5.Brew Potency Limits
Knowing MP helps decide how high you can dose a compound.
Some esters (like Deca or Test E) can go up to 300–400 mg/mL with ease.
Others (like NPP or TPP) crash above 100–150 mg/mL without solvents or EO.
Oxymetholone: 178–180°C
Testosterone Isocaproate: 52–54°C
Testosterone Phenylpropionate: 112–117°C
Testosterone Enanthate: 34–39°C
Nandrolone Decanoate (Deca): 33–37°C
Nandrolone Phenylpropionate: 93–99°C
Why Melting Point Matters in Gear Preparation
As a bodybuilder, if you care about smooth injections, stable vials, and pain-free cycles, melting point is one of the key chemical properties to know — especially if you’re brewing or sourcing underground.
1.Solubility in Oil
Lower melting point = easier to dissolve in carrier oils like MCT, GSO, or EO.
Example: Test E (MP ~34°C) melts like butter — very easy to work with at low temps.
High MP esters like TPP (~115°C) or NPP (~95°C) need more heat to fully dissolve and stay stable.
2.Crash Risk
Ever had a vial crystalize or get cloudy in the fridge or winter? That’s the compound crashing out of solution.
Compounds with high melting points + high doses + poor solvents = crash city.
Avoid this by knowing the MP and adjusting oil type, solvent ratios (BB/BA), and brewing temp.
3.Filtering Temps
High MP compounds need to stay warm during filtering (0.22 μm sterile filter), or they’ll clog the filter or crash mid-process.
You’ll lose product and clog filters = wasted time and money.
4. Injection Pain & PIP
If your brew isn’t fully dissolved, microcrystals form in muscle tissue = post-injection pain (PIP) or even sterile abscess.
High MP compounds are more prone to this if underdosed, under-heated, or made with weak solvents.
5.Brew Potency Limits
Knowing MP helps decide how high you can dose a compound.
Some esters (like Deca or Test E) can go up to 300–400 mg/mL with ease.
Others (like NPP or TPP) crash above 100–150 mg/mL without solvents or EO.
xrayphoton13
Member
Got an email stating test e, deca, npp will be in stock within 3 weeks. You can preorder now with Savi:
Testosterone enanthate: $800/kg
Nandrolone Decanoate: $2480/kg
Nandrolone phenylpropionate (Npp): $2350/kg
Testosterone enanthate: $800/kg
Nandrolone Decanoate: $2480/kg
Nandrolone phenylpropionate (Npp): $2350/kg
BamaCrazy
Banned
They said something similar back on 4/29. Then ended up refunding all the preorders when the stock never arrived.
Cheap, very cheap lol
Photon
Member
No reship if seized by customs too.
xrayphoton13
Member
Did it change? When I ordered you just had to pay for shipping again if that happened. I'm really curious if people are even able to get raws in now from China without seizure. I ordered back in March and they sailed right through in a day but with the end of de minimus it seems there are now a whole lot of issues
Similar threads
