Septa cap for media bottle

[Sampei]

So I have found these silicone stopper for media bottle cap with holes.

Are these ok for being sterilized with dry heat? does the stopper need to be PTFE coated or can be only silicone too?

https://www.aliexpress.com/item/1005004366422406.html#nav-store

should i get the one that have a low thickness or high tickness? I don't really understand what would be best : ( I'm a bit retarded I know

 

[Ateam2023]

i got these from ali, but prices were high imo

 

[Sampei]

i got these from ali, but prices were high imo

Those are butyl stopper, not good for dry heat sterilization, I found septa silicone PTFE coated perfect for dry heat sterilization.

 

[Ateam2023]

from ali , but pretty pricey imo , rated at 180*

 

[Ateam2023]

Those are butyl stopper, not good for dry heat sterilization, I found septa silicone PTFE coated perfect for dry heat sterilization.

are those i pictured gonna work if i sterilize them properly, obviously no heat , but can i just soak them in 99% isopropyl alcohol? or what method would i use to properly sanitize them? Tia brother

 

[Sampei]

are those i pictured gonna work if i sterilize them properly, obviously no heat , but can i just soak them in 99% isopropyl alcohol? or what method would i use to properly sanitize them? Tia brother

Soak them in isopropyl yeah or if you wanna go the extra mile, pressure cooker inside autoclave bags and sanitize them that way, that's 100% sterile 30 minutes at 15psi will have them shine and ready to go

I bought an oven only to be used to sanitize everything so I need stuff that can sustain at least 160degrees of heat

 

[Generalen1]

Do you have a link for the one you found that worked for dry sterilization?

 

[Generalen1]

Soak them in isopropyl yeah or if you wanna go the extra mile, pressure cooker inside autoclave bags and sanitize them that way, that's 100% sterile 30 minutes at 15psi will have them shine and ready to go

I bought an oven only to be used to sanitize everything so I need stuff that can sustain at least 160degrees of heat

Do you have a link for the one you found that worked for dry sterilization?

 

[Sampei]

Do you have a link for the one you found that worked for dry sterilization?

It's a local supplier in Italy. Are you from Europe?

 

[Generalen1]

It's a local supplier in Italy. Are you from Europe?

Yes, scandinavia to be exact

 

[Sampei]

Yes, scandinavia to be exact

I'll ask the guy if he ships internationally and let you know.

 

[Generalen1]

I'll ask the guy if he ships internationally and let you know.

Thank you, sir!

 

[primojuju]

So I have found these silicone stopper for media bottle cap with holes.

Are these ok for being sterilized with dry heat? does the stopper need to be PTFE coated or can be only silicone too?

https://www.aliexpress.com/item/1005004366422406.html#nav-store

should i get the one that have a low thickness or high tickness? I don't really understand what would be best : ( I'm a bit retarded I know

I went back and forth with this problem for a while trying to find a solution for heat sterilization and decided on just getting these caps instead. You dont get a septa to put a needle through, but i just always leave a filter on the top with a syringe plug or just leave an empty luerlock syringe on top for next time. If you type in gl-45 vented cap you should get some results. I believe mine are from ks-tek.
I know I didn't answer your question but it's an alternative if you dont find what you're looking for.

 

[Ateam2023]

I went back and forth with this problem for a while trying to find a solution for heat sterilization and decided on just getting these caps instead. You dont get a septa to put a needle through, but i just always leave a filter on the top with a syringe plug or just leave an empty luerlock syringe on top for next time. If you type in gl-45 vented cap you should get some results. I believe mine are from ks-tek.
I know I didn't answer your question but it's an alternative if you dont find what you're looking for.View attachment 317012

are you just pushing the syringe filter into that small hole in top of cap?

 

[primojuju]

are you just pushing the syringe filter into that small hole in top of cap?

Its got a fixed luer lock port.