I’ve hears ppl mention doing it from the source but I have not a clue about how to. So I wouldn’t mind investing into tools of the trade and doing a little bit of reading can you pm me where I can get stoppers and filter an such
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
its quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit broI’ve hears ppl mention doing it from the source but I have not a clue about how to. So I wouldn’t mind investing into tools of the trade and doing a little bit of reading can you pm me where I can get stoppers and filter an such
lol that is so much more complicated than it needs to be for the OP’s needs. he needs to just buy some sterile vials, syringe filters and 10mL syringes. Remove the oil from the contaminated vial, run through filter into sterile vial. So easyits quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit bro
What lol. A kit is 100ml, you'll lose probably 10ml to syringe filtering and you're staying store 90ml in a media bottle?? Idk wtf you're talking about crimping a media bottle either lol. You can't put a multi use stopper onto a media bottle. And the ptfe "butyl" stoppers are about 4mm thick and hard plastic, they aren't made to by punctured multiple times. And they screw on, They don't crimp on. This whole process you suggested is about 4x more expensive and complicated than just buying sterile sealed vials and 2 syringe filters. Not to mention it makes no practical sense.its quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit bro
send a new email or Whatsaap: +86 16503300980@Qingdao Sigma Chemicals i emailed your team for a price list 2 days ago with no response, is their anyway you can pm me the list thanks
I think now that Tracy has assistants and is less stressed in terms of workload, his sense of humor has become a lot more appreciableYou felt offended, you must be one of those retarded dumb fucks who write in bank transfer : Jeffrey Pussy Cat order of tirzepatide to QSC.
Not quite sure if you're being serious, fucking with me or just new to home brewing or simply can't Google? Brewing into a 100ml bottle is much quicker and simpler than injecting into 10x more 10ml pre sterilized bottles. A 90 mm filter can do 10x more and 10 time faster than the stupid 20-45mm filters. 5 or 6 hard pumps of air at the end of filling your 100ml up and you've got 75% of the oil entrained in the filter. These are the first 3 that popped up on a search and can easily be found in smaller qtysWhat lol. A kit is 100ml, you'll lose probably 10ml to syringe filtering and you're staying store 90ml in a media bottle?? Idk wtf you're talking about crimping a media bottle either lol. You can't put a multi use stopper onto a media bottle. And the ptfe "butyl" stoppers are about 4mm thick and hard plastic, they aren't made to by punctured multiple times. And they screw on, They don't crimp on. This whole process you suggested is about 4x more expensive and complicated than just buying sterile sealed vials and 2 syringe filters. Not to mention it makes no practical sense.
I don't know I beg to disagree especially if we're talking multiple kits worth of Chinese oil getting filtered at a time.lol that is so much more complicated than it needs to be for the OP’s needs. he needs to just buy some sterile vials, syringe filters and 10mL syringes. Remove the oil from the contaminated vial, run through filter into sterile vial. So easy
The way your doing it requires a sterile environment if your dispensing oil into open vials then crimping them. That requires a level of preparation that most are not capable of. As someone with a degree in chem and several years of experience working with chemicals and such I feel like that is overkill for filtering some contaminated vials. If your brewing 1L at a time sure but you need to invest in the proper equipment to keep a sterile environment which in my mind is a huge pain in the ass unless your making a living on it.I don't know I beg to disagree especially if we're talking multiple kits worth of Chinese oil getting filtered at a time.
Wrong again. There actually are screw on media bottle caps that have the multiuse injection ports. Also, anyone that has ever filtered 100 ml knows that you’re not gonna lose 10 ml to filtering.What lol. A kit is 100ml, you'll lose probably 10ml to syringe filtering and you're staying store 90ml in a media bottle?? Idk wtf you're talking about crimping a media bottle either lol. You can't put a multi use stopper onto a media bottle. And the ptfe "butyl" stoppers are about 4mm thick and hard plastic, they aren't made to by punctured multiple times. And they screw on, They don't crimp on. This whole process you suggested is about 4x more expensive and complicated than just buying sterile sealed vials and 2 syringe filters. Not to mention it makes no practical sense.
Laxbro and I both pointed out how complicated you are going about this. Also you're confusing media bottle with vial. Google media bottle and Google vial. You posted screenshots of a vial.Not quite sure if you're being serious, fucking with me or just new to home brewing or simply can't Google? Brewing into a 100ml bottle is much quicker and simpler than injecting into 10x more 10ml pre sterilized bottles. A 90 mm filter can do 10x more and 10 time faster than the stupid 20-45mm filters. 5 or 6 hard pumps of air at the end of filling your 100ml up and you've got 75% of the oil entrained in the filter. These are the first 3 that popped up on a search and can easily be found in smaller qtys
Check out the home brew section here on Meso. You will either find everything you need in existing posts, or make a post and ask there and home brewers will be more then happy to point you to suppliers local to you.I’ve hears ppl mention doing it from the source but I have not a clue about how to. So I wouldn’t mind investing into tools of the trade and doing a little bit of reading can you pm me where I can get stoppers and filter an such
No one homebrewing oil is going to build out a hermetically sealed sterile lab for their liter of oil. pharma grade GMP labs do but QSC is not that. no UGL's do that either. UGL's and these chinese oils are probably dirtier than anything most homebrewers will cook up. the 1% BA is your antimicrobial and the 22um filter takes care of particulate. This isnt home grown mushrooms where the media isnt suspended in a sterilizing/preservative agent. shits not gonna grow in the presence of 1% BA. is it recommended to brew your gear in your dirty ass kitchen while grilling hamburgers next to it, no. some simple cleanliness and dust mitigation techniques is all you need and dont go scratching your head or beard over top of your oil filling it with dandruff flakes. you could even use an inflatable glove bag to brew in but ive found that not even necessary. anyone reading my posts... ive got a degree in homebrewing and using UGL hormones personally for 20 years but definitely no formal education so take any of my shit advice with a grain of salt.The way your doing it requires a sterile environment if your dispensing oil into open vials then crimping them. That requires a level of preparation that most are not capable of. As someone with a degree in chem and several years of experience working with chemicals and such I feel like that is overkill for filtering some contaminated vials. If your brewing 1L at a time sure but you need to invest in the proper equipment to keep a sterile environment which in my mind is a huge pain in the ass unless your making a living on it.
Edit: I can brew and bottle over 500mL in less than 2 hours using the equipment I described. If your brewing for personal use that is more than efficient enough.
agree to disagree I suppose. The reason I brew my own oils is so that I don’t inject a product made in the sort of environment you describe because it is not safe or sterile at all.No one homebrewing oil is going to build out a hermetically sealed sterile lab for their liter of oil. pharma grade GMP labs do but QSC is not that. no UGL's do that either. UGL's and these chinese oils are probably dirtier than anything most homebrewers will cook up. the 1% BA is your antimicrobial and the 22um filter takes care of particulate. This isnt home grown mushrooms where the media isnt suspended in a sterilizing/preservative agent. shits not gonna grow in the presence of 1% BA. is it recommended to brew your gear in your dirty ass kitchen while grilling hamburgers next to it, no. some simple cleanliness and dust mitigation techniques is all you need and dont go scratching your head or beard over top of your oil filling it with dandruff flakes. you could even use an inflatable glove bag to brew in but ive found that not even necessary. anyone reading my posts... ive got a degree in homebrewing and using UGL hormones personally for 20 years but definitely no formal education so take any of my shit advice with a grain of salt.
Laxbro and I both pointed out how complicated you are going about this. Also you're confusing media bottle with vial. Google media bottle and Google vial. You posted screenshots of a vial.
You also aren't talking about brewing, you're talking about re filtering.
I can't reply to the rest of your process because you're making no sense guy. Refiltering 10 vials doesn't need to be this complicated or expensive
Is it just other peptides that can be ordered with the promo? Or can this include bac water and possibly oil in same shipment?send a new email or Whatsaap: +86 16503300980
Let's see....clients of this bargain basement outfit with male employees posing as women in an attempt to sexually arouse and entice its mostly male clients into spending more while being more likely to roll over and allow Mr Tracey to take a shit in their mouthes while taking credit for buying them all dinner. These fuckers laugh while talking amongst themselves about how stupid we all are. QSC wants to call people racists etc. while he and his sweatshop emploees are and have been the most bigoted group of human beings vorociously consuming and assimilating the propaganda they are force fed by the State. All that shit still fuels the evil known as Communism. Always has. They've always loathed the West while wandering around intoxicated with the USD they hate but can't get enough of it at the same time.Are you saying that the source needs to be clear that customers should not include messages about anabolic steroids in an international wire transfer that will be processes by multiple banks that have an obligation to intervene when funds are being transferred for illegal goods?
Anyone who is includes such messages in their wire transfer is an idiot and deserves to lose their money.
