Maximum testosterone undeconate mg/ml

[TestYourlimits]

Hello,
I wanted to make the highest rate of mg/ml testosterone undeconate
For that I need your advise
I know that 300mg/ml is exist but what is the maximum?
It's for a usage of TRT
It's hard to take once in 14 days 250mg testosterone E as it's falling on the last days to 4-5 units in the blood
Thank you .

 

[Jire]

Nebido is 400mg/mL so that's a good starting point

I've done 500mg/mL with no solvents personally, 0.9% BA, in olive oil

 

[KingdomOfVar]

Nebido is 400mg/mL so that's a good starting point

I've done 500mg/mL with no solvents personally, 0.9% BA, in olive oil

Nebido is 1000mg in 4ml = 250mg/ml and content of BB is 50% ! Making testo U 400mg is imposible without solvents. Without solvents you can make only testo E.

 

[Rido]

I think QIngdao has a test U oil test at 350. Jesus fucking Christ.

 

[narta]

Nebido is 1000mg in 4ml = 250mg/ml and content of BB is 50% ! Making testo U 400mg is imposible without solvents. Without solvents you can make only testo E.

Test Decanoate can be brewed at 350mg/ml with the usual 2/20. I saw some guy pushing 400mg/ml and says it's pip free.

Undecanoate I don't know but the usual principle is the longer the ester the easier goes into solution. Boldenone Undecyclate can go at 400mg/ml preaty easy with the usual BA/BB

 

[Jire]

Nebido is 1000mg in 4ml = 250mg/ml and content of BB is 50% ! Making testo U 400mg is imposible without solvents. Without solvents you can make only testo E.

I don't use any solvents and I've brewed test U, C, P, base and much more without any issues

 

[Jire]

Test Decanoate can be brewed at 350mg/ml with the usual 2/20. I saw some guy pushing 400mg/ml and says it's pip free.

Undecanoate I don't know but the usual principle is the longer the ester the easier goes into solution. Boldenone Undecyclate can go at 400mg/ml preaty easy with the usual BA/BB

Yeah at 500mg I've no PIP the stuff is easy to brew

 

[KingdomOfVar]

I don't use any solvents and I've brewed test U, C, P, base and much more without any issues

Sorry, but brewing this compounds WITHOUT SOLVENTS is not possible.

 

[narta]

Sorry, but brewing this compounds WITHOUT SOLVENTS is not possible.

I think he means no exotic solvents, gua or eo?

 

[narta]

Yeah at 500mg I've no PIP the stuff is easy to brew

500mg/ml?

Bold or Test D?

 

[KingdomOfVar]

I think he means no exotic solvents, gua or eo?

He wrote ANY solvent, and its simply impossible.

 

[Jire]

Sorry, but brewing this compounds WITHOUT SOLVENTS is not possible.

Cuz my brewing method uses a pressure cooker to heat, I don't use any solvents to dissolve but rather just heat. Once you reach melting point you can dissolve almost infinite dose into a carrier oil. This is how I am able to prepare high dose injectables which are 100% PIP free. The problem is typical bodybuilder preparations, falsely believe that heat will destroy the compound so they use solvents.

 

[KingdomOfVar]

Cuz my brewing method uses a pressure cooker to heat, I don't use any solvents to dissolve but rather just heat. Once you reach melting point you can dissolve almost infinite dose into a carrier oil. This is how I am able to prepare high dose injectables which are 100% PIP free. The problem is typical bodybuilder preparations, falsely believe that heat will destroy the compound so they use solvents.

Dissolving and holding ( not crushing ) are not same things. Testo C , P, Base etc. they CANT be brewed and stored without solvent ( almost all steroids , except Bolde U, testo E, Deca nandro ... ) because after cooling process they will crush imediately.

 

[TestYourlimits]

Nebido is 400mg/mL so that's a good starting point

I've done 500mg/mL with no solvents personally, 0.9% BA, in olive oil

hello, ive never seen 400mg/ml Nebido
In general 500/ml is amazing but are you sure that its stable ?

 

[TestYourlimits]

Nebido is 1000mg in 4ml = 250mg/ml and content of BB is 50% ! Making testo U 400mg is imposible without solvents. Without solvents you can make only testo E.

You mean to add BB right?

 

[narta]

Cuz my brewing method uses a pressure cooker to heat, I don't use any solvents to dissolve but rather just heat. Once you reach melting point you can dissolve almost infinite dose into a carrier oil. This is how I am able to prepare high dose injectables which are 100% PIP free. The problem is typical bodybuilder preparations, falsely believe that heat will destroy the compound so they use solvents.

Reaching melting point will force the raw to go into solution at relative high concentrations BUT after cooling carrier oil alone can't maintain that concentration and it will fall out of solution.
I can get test e to go at solution at 400mg/ml but it will either have terrible pip or crash completely. And pip is usually microcrystals that are out of solution not visible to the naked eye

 

[KingdomOfVar]

You mean to add BB right?

Original Nebido contains 50% of BB ( what is high compared to usual % in AAS products )
Making testo U with no solvent is not possible, the same like testo C,P, Base....and most of all AAS products

 

[TestYourlimits]

Original Nebido contains 50% of BB ( what is high compared to usual % in AAS products )
Making testo U with no solvent is not possible, the same like testo C,P, Base....and most of all AAS products

I understand ,so its good to know your view as i find it more realistic ,
anyway so what is the recipe that you recommend me to make the maximum mg/ml of Test undecunate , using BB is not a problem
sorry for my english

 

[KingdomOfVar]

I understand ,so its good to know your view as i find it more realistic ,
anyway so what is the recipe that you recommend me to make the maximum mg/ml of Test undecunate , using BB is not a problem
sorry for my english

I brewed 250mg testo U with 25% BB and 25% EO , if you want to brew U in around 300mg, BB must be more like 25% , or you must add EO or pure Alcohol ( 96-98% purity )

 

[Jire]

Dissolving and holding ( not crushing ) are not same things. Testo C , P, Base etc. they CANT be brewed and stored without solvent ( almost all steroids , except Bolde U, testo E, Deca nandro ... ) because after cooling process they will crush imediately.

It does not crash. The only preparations I have difficulty with are unestered with high melting point like raw DHT. It requires extreme heat to melt into solution, and requires to stay heated on a coffee mug warmer otherwise it will crash.

Estered testosterone, no matter P, E, C, D, or U I have not encountered any issue dissolving nor crashing, with zero solvents.