Tren A brew

[jJjburton]

So i believe this is correct.

Tren A 8 grams

100 mg/ml

80 mL total= 14.4 mL of BB and 1.6 mL of BA 64 mL MCT

Anybody know the Tren A displacement?
.848 mL displacment per gram?

67.84 mL of MCT
Using the displacment of above it comes out to 83.84 mL

Should I just use the first or second? It would only make the concentration a little off either way. Personal brew.

 

[jJjburton]

I messed up the displacement....
57.216 mL MCT should be used due to displacment...

 

[jJjburton]

using this soon

 

[monichi]

So You mean 2% BA and 18%BB
with displacement tren Ace 0.848 100mg/ml
for a total of 80 ml
it's:
57.22 ml of MCT
8 gr of raw Trenbolone Acetate
1.6 ml of BA
14.4 ml of BB

 

[jJjburton]

Ended up making this tren a brew with
24 % BB
2.5 % BA

8 grams at 60 mL

133 mg/mL holding fine. Will keep it at this

 

[jJjburton]

Getting a decent amount of pip when I pin the full cc at 133 mg. But When I pin the 66 .5 cc I am good. So will either cut with a little more oil or just pin .5cc and mix with something.

 

[Cakedup]

Getting a decent amount of pip when I pin the full cc at 133 mg. But When I pin the 66 .5 cc I am good. So will either cut with a little more oil or just pin .5cc and mix with something.

I can see why that amount BB. Why are you using that amount of BB for Tren A? even at 130 mg?

 

[jJjburton]

I can see why that amount BB. Why are you using that amount of BB for Tren A? even at 130 mg?

I forgot to add 20 mL and was too lazy to add some. I know for a fact that its not the BB and its the concentration. So getting another vial tomorrow to fix it.

 

[Cakedup]

I forgot to add 20 mL and was too lazy to add some. I know for a fact that its not the BB and its the concentration. So getting another vial tomorrow to fix it.

Hold on you know for a fact that's not the BB at 24% or something like that you said, but you know it's the concentration? I don't understand how going to that conclusion considering I've made Tren A as high as 200mg with no pip whatsoever. So I'm trying to figure out how you deserve it is the concentration? I'm not trying to be a smart-ass either brother don't take it the wrong way please I'm just trying to figure it out and then if you want I can give you a recipe that has no PIP

 

[jJjburton]

Hold on you know for a fact that's not the BB at 24% or something like that you said, but you know it's the concentration? I don't understand how going to that conclusion considering I've made Tren A as high as 200mg with no pip whatsoever. So I'm trying to figure out how you deserve it is the concentration? I'm not trying to be a smart-ass either brother don't take it the wrong way please I'm just trying to figure it out and then if you want I can give you a recipe that has no PIP

I have another compound that I forgot to add oil al together and I mix it with my other compounds and dont get any pip. I have pinned it lone before too. So its just compound, BA and BB. Never got pip from it. Its EQ at 425 mg/ml

 

[jJjburton]

Hold on you know for a fact that's not the BB at 24% or something like that you said, but you know it's the concentration? I don't understand how going to that conclusion considering I've made Tren A as high as 200mg with no pip whatsoever. So I'm trying to figure out how you deserve it is the concentration? I'm not trying to be a smart-ass either brother don't take it the wrong way please I'm just trying to figure it out and then if you want I can give you a recipe that has no PIP

So it the tren only has 24 percent and I get pip I would think its the compound.

What was you recipe...I will be fixing both the EQ and the Tren friday when I get empty vials. I ran out. So just pinning it like this for 3 days until I can fix it.

 

[Cakedup]

I have another compound that I forgot to add oil al together and I mix it with my other compounds and dont get any pip. I have pinned it lone before too. So its just compound, BA and BB. Never got pip from it. Its EQ at 425 mg/ml

Okay that makes sense if that EQ 425mg has less than 20% BB in it? Which it should because you don't need BB to hold EQ. However if that EQ has 18 or 20% BB in it then it's definitely the BB and not the compound or the concentration should I say.

 

[Cakedup]

So it the tren only has 24 percent and I get pip I would think its the compound.

What was you recipe...I will be fixing both the EQ and the Tren friday when I get empty vials. I ran out. So just pinning it like this for 3 days until I can fix it.

I mean what mg do you want to make it at and I can give you the recipe? Are you trying to keep it at 133mg go up to 150 or even 200mg? Or maybe you're making a new batch from scratch? Just let me know?

 

[jJjburton]

Okay that makes sense if that EQ 425mg has less than 20% BB in it? Which it should because you don't need BB to hold EQ. However if that EQ has 18 or 20% BB in it then it's definitely the BB and not the compound or the concentration should I say.

Yes I will be fixing it this weekend. I just do 18 BB cause its easy. But in the future going to go a little lower.

 

[jJjburton]

I mean what mg do you want to make it at and I can give you the recipe? Are you trying to keep it at 133mg go up to 150 or even 200mg? Or maybe you're making a new batch from scratch? Just let me know?

No, If I add 20 mL of oil the tren A will hit 100 mg at 18 perent BB and 2 percent BA. Because that was the original recipe but I added up to 60 mL instead of adding the 60 mL amount to hit 80 mL. Which then in turn made the recipe from 100 mg 18/2 to 133 24/2.5 So It will fix itself when I add 20 mL MCT.

 

[Cakedup]

No, If I add 20 mL of oil the tren A will hit 100 mg at 18 perent BB and 2 percent BA. Because that was the original recipe but I added up to 60 mL instead of adding the 60 mL amount to hit 80 mL. Which then in turn made the recipe from 100 mg 18/2 to 133 24/2.5 So It will fix itself when I add 20 mL MCT.

This is for 80ml of Tren A 100mg

Tren A 100mg
2%BA=1.6ml
18BB=14.4ml
MCT=57.22ml

This will be completely painless... As long as it was made correctly. Meaning it was heated up enough, and for long enough while being stirred. So that the hormone completely dissolved into a solution, and it was filtered correctly so that it was Sterile...
.

 

[egonormical1010]

I’ve used TNE with an exorbitant amount of BB (over 40%) and had no soreness. People hear the word solvent and they think they’re injecting something like paint thinner. I don’t buy into the notion that BB causes pip.

 

[jJjburton]

I’ve used TNE with an exorbitant amount of BB (over 40%) and had no soreness. People hear the word solvent and they think they’re injecting something like paint thinner. I don’t buy into the notion that BB causes pip.

I agree

 

[jJjburton]

This is for 80ml of Tren A 100mg

Tren A 100mg
2%BA=1.6ml
18BB=14.4ml
MCT=57.22ml

This will be completely painless... As long as it was made correctly. Meaning it was heated up enough, and for long enough while being stirred. So that the hormone completely dissolved into a solution, and it was filtered correctly so that it was Sterile...
.

Yes this is what I had thank you.

 

[Iron Vett]

I’ve used TNE with an exorbitant amount of BB (over 40%) and had no soreness. People hear the word solvent and they think they’re injecting something like paint thinner. I don’t buy into the notion that BB causes pip.

it really can’t be stated as a general rule that excessive solvents don’t cause injection discomfort. I am one of the lucky ones who really get no pain from any injections but there are some people who are sensitive to some or even all solvents being used and they can get some petty serious discomfort from injecting high solvent solutions. If you are brewing only for yourself, you are free to brew however you feel it works best for you but if you begin helping others out with your brew, you’ll find that the lower rates of solvent will be tolerated better by a wider range of people.