MESO-Rx

Anabolic Steroids

Titanium Gear Industries (domestic source)

So my slin pins, 1ml. When I push the liquid out, the plunger goes as far as it can but a little bit gets trapped in the neck. Does anyone know any pins that have less of a neck.. where the plunger ends closer to the actual pin and pushes everything out??? I pretty much lose just under .05 ml each time. I have been sucking some bac water back in and injecting again to get more of the stuff, but it's a bitch. Not a big deal for gear, but when injecting hgh 2x per day and losing almost .05 each time... .08-.1 ml loss per day... It doesnt seem much again but it's close to 1.0 iu with the way I dose it. cause 1/10 an ML is 1iu... Again that's what I'd be losing if I didn't add more water to it each time and then re-inject . And obv over time even if I only lost .5 iu a day, over 20 days that's 10iu wasted.. I'm gonna keep doing the water thing but just wondering if any ppl know any slin pins that pushes everything out and minimizes loss... The plunger on this one stops at the neck and there's no way to get the rest out. Basically would want one where the plunger almost goes right to needle exactly with nothing lost in neck
 
Report from a friend on the mig840 tren a/ mast p blend. Three injections in. No pip and the oil moves very easily through the barrel. Night sweats have started so there is definitely tren in there.

Had a personal situation that caught me off guard and had me ready to drop out of Nationals which I had already qualified and paid the entry fee for. A friend here persuaded me not to skip the meet. For that I'm thankful and will try to put up some strong numbers.
 
really small guy said:
So my slin pins, 1ml. When I push the liquid out, the plunger goes as far as it can but a little bit gets trapped in the neck. Does anyone know any pins that have less of a neck.. where the plunger ends closer to the actual pin and pushes everything out??? I pretty much lose just under .05 ml each time. I have been sucking some bac water back in and injecting again to get more of the stuff, but it's a bitch. Not a big deal for gear, but when injecting hgh 2x per day and losing almost .05 each time... .08-.1 ml loss per day... It doesnt seem much again but it's close to 1.0 iu with the way I dose it. cause 1/10 an ML is 1iu... Again that's what I'd be losing if I didn't add more water to it each time and then re-inject . And obv over time even if I only lost .5 iu a day, over 20 days that's 10iu wasted.. I'm gonna keep doing the water thing but just wondering if any ppl know any slin pins that pushes everything out and minimizes loss... The plunger on this one stops at the neck and there's no way to get the rest out. Basically would want one where the plunger almost goes right to needle exactly with nothing lost in neck
Click to expand...
Air bubble?? Intramuscular or subq, I dont think theres an issue for a small air bubble. But I never really worried about that lil extra. I still aspirate so theres always a lil bubble in my syringes. oh this is for hgh, I dont think a small bubble will hurt. Or they make a kind with a nipple on the plunger too.
 
really small guy said:
So my slin pins, 1ml. When I push the liquid out, the plunger goes as far as it can but a little bit gets trapped in the neck. Does anyone know any pins that have less of a neck.. where the plunger ends closer to the actual pin and pushes everything out??? I pretty much lose just under .05 ml each time. I have been sucking some bac water back in and injecting again to get more of the stuff, but it's a bitch. Not a big deal for gear, but when injecting hgh 2x per day and losing almost .05 each time... .08-.1 ml loss per day... It doesnt seem much again but it's close to 1.0 iu with the way I dose it. cause 1/10 an ML is 1iu... Again that's what I'd be losing if I didn't add more water to it each time and then re-inject . And obv over time even if I only lost .5 iu a day, over 20 days that's 10iu wasted.. I'm gonna keep doing the water thing but just wondering if any ppl know any slin pins that pushes everything out and minimizes loss... The plunger on this one stops at the neck and there's no way to get the rest out. Basically would want one where the plunger almost goes right to needle exactly with nothing lost in neck
Click to expand...

TX_Hempknight said:
Air bubble?? Intramuscular or subq, I dont think theres an issue for a small air bubble. But I never really worried about that lil extra. I still aspirate so theres always a lil bubble in my syringes. oh this is for hgh, I dont think a small bubble will hurt. Or they make a kind with a nipple on the plunger too.
Click to expand...
Always leave a small air bubble - never fails to get everything out. You’re not injecting into to a vein, so I don’t see any issues with that.
 
DOMS4DAYS said:
Will be running something similar to this July 1st but twice as long with slightly higher NPP, lower EQ, higher Test and Adrol either in front end or back end (haven’t decided this yet). Looking forward to growing on this!

Something like this....
TestC/TPP 1,085/wk 1-23 (TPP 650mg/wk, TC 435mg/wk)
NPP 650mg/wk 1-23
EQ 525mg/wk 1-23
Adrol 50mg preworkout wk 1-6 or somewhere on backend
Aromasin 12.5MG/ED
GH Optitroptin 4iu EOD
Insulin around cheat meals/preworkout to match carb intake
Click to expand...
That definitely looks like a growth cycle! Have you run this cycle before?
how my blood work looks at 10 week mark will dictate if I run the cycle to 16 weeks or cut it at 10 weeks.
Because I am looking for lean gains I don't know yet if anadrol or sdrol should be in the cycle.
 
TX_Hempknight said:
Air bubble?? Intramuscular or subq, I dont think theres an issue for a small air bubble. But I never really worried about that lil extra. I still aspirate so theres always a lil bubble in my syringes. oh this is for hgh, I dont think a small bubble will hurt. Or they make a kind with a nipple on the plunger too.
Click to expand...
Well, I'm using GH as an example because the small amount matters more.. I don't miss the loss with my other gear rly. I'll try the air bubble.
Screenshot_20190521-133055.png
I got these and there's a there a whole lot of empty space in that neck that the liquid hides.. maybe detachable is the problem. I seem to remember there being less of that space in the fixed pins. But ye will try air again till I find a better pin. I must be extra stupid, the air never seems to go by the plunger but always at the top and it's the first thing out. Lmao. Like I said, never worried about it with gear before cause I thought the loss was so minimal, but it's more significant with GH after I did a little math on it.
 
really small guy said:
Well, I'm using GH as an example because the small amount matters more.. I don't miss the loss with my other gear rly. I'll try the air bubble.
View attachment 112561
I got these and there's a there a whole lot of empty space in that neck that the liquid hides.. maybe detachable is the problem. I seem to remember there being less of that space in the fixed pins. But ye will try air again till I find a better pin. I must be extra stupid, the air never seems to go by the plunger but always at the top and it's the first thing out. Lmao. Like I said, never worried about it with gear before cause I thought the loss was so minimal, but it's more significant with GH after I did a little math on it.
Click to expand...
One piece slin pins have less wasted space. That’s what I use.
771FEAF1-388B-42C0-A76D-D4E4A424254C.jpeg
 
really small guy said:
Well, I'm using GH as an example because the small amount matters more.. I don't miss the loss with my other gear rly. I'll try the air bubble.
View attachment 112561
I got these and there's a there a whole lot of empty space in that neck that the liquid hides.. maybe detachable is the problem. I seem to remember there being less of that space in the fixed pins. But ye will try air again till I find a better pin. I must be extra stupid, the air never seems to go by the plunger but always at the top and it's the first thing out. Lmao. Like I said, never worried about it with gear before cause I thought the loss was so minimal, but it's more significant with GH after I did a little math on it.
Click to expand...

Garbage! i wouldn't use those shit detachables if i was given a free lifetime supply of them.
 
Masters Power said:
Report from a friend on the mig840 tren a/ mast p blend. Three injections in. No pip and the oil moves very easily through the barrel. Night sweats have started so there is definitely tren in there.

Had a personal situation that caught me off guard and had me ready to drop out of Nationals which I had already qualified and paid the entry fee for. A friend here persuaded me not to skip the meet. For that I'm thankful and will try to put up some strong numbers.
Click to expand...

You’re friend is right and will be very happy with it. Running it now with very good results. Have been running 1cc/eod but recently bumped it up to 1.5cc/eod to finish out the last few weeks of this cut. There’s a bit of a bite to it immediately after pin with the 1.5cc which is to be expected but no PIP. It’s good! [emoji1417][emoji1434][emoji1419][emoji1605]
 
Last edited:
You must log in or register to reply here.

Similar threads

sp5der
sp5der - QUALITY US DOMESTIC
34 35 36
Replies
702
Views
35K
LaCreme
L
Venom Lab
Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic
27 28 29
Replies
565
Views
46K
PnkCy
P
Photon
(US) Vendor gear found with dissolved brewing equipment (Plastic)
4 5 6
Replies
115
Views
8K
Dial It In
Dial It In
P
WWB issue
Replies
10
Views
725
Ziath11
Ziath11
SulekJr
Fairly priced EQ/Boldenone?
2 3 4
Replies
67
Views
2K
Banana Joe
Banana Joe

Sponsors

Latest posts

Back
Top