MESO-Rx Sponsor Primal Pharma - US Domestic

[sionnach]

We have highest available Tuta plan you can possibly have and they just hit us with a ‘you have sent too many emails, please try again later.’ After doing some digging, a lot of the times it is a false positive and we should be good to go in a day or so.

But it is genuinely sad how hard it is to find a decent emailing service. If anyone has any suggestions, please DM us. If you don’t receive any emails for the rest of the day, it’s because of this. So we are genuinely sorry…

This is to keep spammers from using their service, but it's wild you're getting hit for it on a paid account. What did tuta support say?

 

[Primal_Pharma]

This is to keep spammers from using their service, but it's wild you're getting hit for it on a paid account. What did tuta support say?

Get this - to talk to support, you have to send an email to them. And every time we try and send one, it says we’ve ’exceeded the number of emails you can send.’ I can’t believe this is even a thing… I’m genuinely at a loss for words

 

[dick_starbuck]

First time this has ever happened. Flattened but still intact? Mind sending some pictures via DM? Would like to fix this!

Well... flattened in the middle. The twist caps and bottom remained intact. The capsules are fine. Looks like someone may have sat on the package.

 

[sionnach]

Get this - to talk to support, you have to send an email to them. And every time we try and send one, it says we’ve ’exceeded the number of emails you can send.’ I can’t believe this is even a thing… I’m genuinely at a loss for words

Lmao

 

[Dial It In]

Well... flattened in the middle. The twist caps and bottom remained intact. The capsules are fine. Looks like someone may have sat on the package.

Prob that damn gorilla

 

[dick_starbuck]

Well... flattened in the middle. The twist caps and bottom remained intact. The capsules are fine. Looks like someone may have sat on the package.

No fix is necessary! All it took me was to mush them back into their original shape.

USPS mishandling is not your fault but I do appreciate your willingness to "make it right". However in this instance the capsules appear intact and its all good. Maybe some more cushioning on orals is warranted in the future.

 

[Primal_Pharma]

No fix is necessary! All it took me was to mush them back into their original shape.

USPS mishandling is not your fault but I do appreciate your willingness to "make it right". However in this instance the capsules appear intact and it’s all good. Maybe some more cushioning on orals is warranted in the future.

Appreciate you, brother! If anything else arises please don’t hesitate to DM or email either.

 

[Oldhand]

Get this - to talk to support, you have to send an email to them. And every time we try and send one, it says we’ve ’exceeded the number of emails you can send.’ I can’t believe this is even a thing… I’m genuinely at a loss for words

It’s diabolical. Whoever designed this is some sort of evil genius.

 

[BamaCrazy]

Placed an order Friday night. Package delivered this afternoon after a holiday. Primal’s TA is wild.

 

[readalot]

Placed an order Friday night. Package delivered this afternoon after a holiday. Primal’s TA is wild.

Spooky.

 

[CHIEF M]

Well... flattened in the middle. The twist caps and bottom remained intact. The capsules are fine. Looks like someone may have sat on the package.

One of My anadrol bottles had a empty cap but the other had 3 extra caps lol

 

[newguy2]

We have highest available Tuta plan you can possibly have and they just hit us with a ‘you have sent too many emails, please try again later.’ After doing some digging, a lot of the times it is a false positive and we should be good to go in a day or so.

But it is genuinely sad how hard it is to find a decent emailing service. If anyone has any suggestions, please DM us. If you don’t receive any emails for the rest of the day, it’s because of this. So we are genuinely sorry…

What made you guys move away from Proton?

 

[jan912]

Just curious why the super low dose? 20mg daily is decently “low dose” for longer duration of time. I will say that 40mg accutane from Primal will have you dry and chapped so I know it works. I used Pharma grade 30mg accutane and wasn’t too bad on dryness but for me the 40mg was drying me out quite a bit more as it should I guess. Not sure if you can cut them in half and make 10mg from splitting a 20mg cap. They are more like a gel type pill and not the normal cap that’s filled with powder. But I’m not 100% sure. I’ve never attempted to cut them in half. They are kinda soft and sticky.

You can't cut them in half bro they're filled with oil

 

[Primal_Pharma]

What made you guys move away from Proton?

People of low character

 

[Bandern]

People of low character

Otherwise known as Italians

 

[Docsunshine23]

How many of us have pinned the Sus500? I’m mainly interested in a PIP report. The highest Sustanon I’ve pinned was @ 300.

I’ve been tolerating the TE500 well for what it’s worth.

How the fuck? I usually can handle high concentrations and the TE500 cut with another source TE300 wasn’t bad but the pure TE500 half cc fucking peg legged me for a week

 

[newguy2]

People of low character

Proton ftw

 

[Photon]

Looks like someone may have sat on the package.

 

[Photon]

Absolutely would. Please DM me. Let me also confirm with brewer to make sure we’re still using those

PVDF can only be used for low BB solutions, you cant use for high concentration oils and def not injectable orals or TNE. The filter will leech.
PTFE is best, but can be difficult to source.
Nylon is in between.

You want bottle top filters that use polypropylene.
Something like these (you have to source around).

Bottletop
0.22um, Nylon, polypropylene

Autofil Solvent Resistant PP Bottle-Top Filter, 1000mL, Nylon, 0.22um, Single

Autofil PP Disposable Vacuum Bottle-Top Filter for Solvent Filtration, 1000mL, Nylon, 0.22um, 325-5241-FLS

www.medical-and-lab-supplies.com

0.2um, Nylon, polypropylene
ZapCap-CR (Chemical resistant)

Loading…

www.sigmaaldrich.com

Capsule filter
0.2um, PTFE, polypropylene

Whatman Polycap TF 36 Capsule Filter, 0.2um, PTFE, Sterile, 6700-3602

Buy Whatman Polycap TF 36 Capsule Filter, 0.2um, PTFE, Sterile, 6700-3602 Capsule Filters online at Med Lab Supply. Buy vacuum & Peristaltic Pumps online, ships same day!

www.medical-and-lab-supplies.com

You do NOT want anything with polystyrene
(Vast majority is polystyrene. if you don't know, it's polystyrene)
e.g below.

Ks-Tek PVDF

12PCS Sterile Bottle Top Vacuum Filtration with 0.22/0.45μm PVDF Hydro

★★★ Ks-Tek disposable Vacuum Filtration units are very useful in large volume samples separation and purification for tissue culture media, biological fluids and fixation buffers. ★★★ Designed to fit plastic or glass media bottles with 45mm neck sizes.Manufactured in North America to the...

ks-tek.com

Millipore PVDF

Loading…

www.sigmaaldrich.com

ZapCap S-PLUS

Whatman GVS 10443430 ZapCap-S PLUS Bottle top Filter, CA/GF 0.2 µm, 76mm, 500mL Reservoir, Sterile, 12/pk

ZapCap-S PLUS / Sterile, Cellulose Acetate (CA) (CA) with glass fiber prefilter Membrane, 0.2µm, Polystyrene housing, 12/pkZapCap(TM) Bottle-Top Filters:. For filtration of medium volumes;. Can be used up to 50degC.. ZapCaps are complete 500 mL units with tubing for attaching to bottle tops. The...

www.dscbalances.com

30 minutes at 50 C when exposed to BA/BB

https://pubs.acs.org/doi/10.1021/acssuschemeng.3c08154

As of now there is no way to test for polystyrene or melted filters..but I'm hoping things will change in future..or not..or maybe vendors should start selling unfiltered oils instead..

Hope this helps.

 

[Rhynosaurus]

We. When we