rdgrenade01
Member
Did my first inject of his test cyp all went smoothly and through a 30g, no pip as of now. Will get blood work in a few weeks to see levels
MESO-Rx
Anabolic Steroids
GG-Pharma (USA) Domestic
- Thread starter russianboy12
- Start date
Enjoythements
Member
rdgrenade01
Member
Don't know who asked you...
russianboy12
Subscriber
Thank you for the support there. Looking forward doing business with you
russianboy12
Subscriber
As promised here are the lab pictures and sterilization process.
Sterilization Process – GG Pharma
At GG Pharma, we take immense pride in our sterilization process, ensuring that every step meets the highest standards of safety, consistency, and quality control.
We are always happy to answer any questions regarding our process. At GG Pharma, we stand behind every product we produce and take quality and customer trust very seriously.
Thank you for choosing us—we appreciate the opportunity to be part of the Meso family.
Sterilization Process – GG Pharma
At GG Pharma, we take immense pride in our sterilization process, ensuring that every step meets the highest standards of safety, consistency, and quality control.
Glassware Sterilization
- All glassware is sterilized using an autoclave at 273°F (134°C) with distilled water for 40–50 minutes.
- Following autoclaving, glassware is transferred to a dry heat oven at 350°F (177°C) for 40 minutes, including our 10mL sterile vials, which are pre-sterilized by MLS.
- Once completed, glassware is stored in a medical-grade UV sterilizer until ready for use, maintaining sterility until the moment of production.
Work Environment & Personal Protective Measures
- For every production batch, a brand-new HDX Coverall, sterile gloves, and a full-face respirator are worn to eliminate contamination risks.
Stopper & Component Sterilization
- All stoppers from MLS undergo an additional secondary sterilization process. They are soaked in 91% isopropyl alcohol for four hours, then rinsed with deionized water, dried, and stored in sterile bags before use.
Tablet Production & Quality Control
- All oral tablets are made using pharmaceutical-grade powders from LFA.
- During tablet pressing, we maintain the highest cleanroom protocols, including the use of HDX Coveralls, sterile gloves, and full-face respirators.
Dosing Accuracy & Quality Assurance
- Injectable products are dosed 7–10% higher than the labeled amount to ensure potency and consistency.
- Women’s products are precisely dosed to match the label without variation.
We are always happy to answer any questions regarding our process. At GG Pharma, we stand behind every product we produce and take quality and customer trust very seriously.
Thank you for choosing us—we appreciate the opportunity to be part of the Meso family.
accidentaljedi173
Member
Chat gpt is great isnt it? Any reason you chose to not use a crumpled piece of paper?
russianboy12
Subscriber
Yes I like to run spelling through that nothing wrong with that. Kinda like the cardboard gives it a flair
Daddy Rabbit
New Member
Will you be running any promo's in the future?
russianboy12
Subscriber
In the future yes but as of now with having a major raw shortage its hard . Ill be posting sales here and on the telegram in the future absolutely. We also do giveaways on the telegram so go ahead and join.
This is a lab? One that’s been in business for years? I’ve seen start up labs that were more impressive. Obviously no money has ever went back into the lab after your initial start up. This is a stainless steel table with a few odds and ends on it. Hell, at least buy a couple of air purifiers since there is no flowhood in sight. Where is that Torbal AD 60 scale you mentioned having? Btw, do you know what that 60 stands for? That scale is rated for a maximum of 60g. Which would mean you are brewing ridiculously small batches.
Since you got here it has been yada yada and nothing but BS from you. You’re only still here because there are a few gear whores that care more about free gear than the well being of Meso.
accidentaljedi173
Member
This guy is a joke. Yet you got people on this thread asking for promos? Wasn't to long ago that any new source trying to offer free gear would have been burned alive. Shit boggles my mind.
russianboy12
Subscriber
Hi there,
You are absolutely correct—this is a smaller-scale setup, primarily used for female oral dosing and low-dose testosterone formulations. When we first started, we operated at a smaller capacity, but we have since expanded to a larger-scale production.
There are certain images I prefer not to share publicly, such as our pill-making equipment, as well as specific lab setup details. Our primary goal is to demonstrate a sterile and controlled environment, not to showcase images that could be misrepresented—such as a setup next to household items, which does not reflect our actual working conditions.
How I choose to scale and optimize my lab is ultimately my decision, provided that our products maintain the highest possible quality. I have found that brewing in smaller batches results in better oil consistency and more precise pill formulations, which is reflected in batch testing.
You are also correct that we do not currently have a flow hood setup in this space, as it is not feasible at this time. However, we have ensured that adequate airflow and environmental controls are in place to maintain cleanliness and sterility.
Having observed other domestic sources on Meso and their lab setups, I can confidently say that our standards are on par with, if not exceeding, many others. Additionally, there are several labs that have never even shared photos, so we believe we are approaching transparency the right way.
I sincerely appreciate your comments and concerns, and we will certainly take all feedback into consideration as we continue improving our operations within the Meso community.
Thank you for your input and support!
FastBun
Member
It’s a joke lab… just like all the others ones that make noise for the first couple days… then fade into the bliss… gotta love the cheap Chinese dispensers that aren’t even for that and unsanitary…the Erlenmeyer flask instead of media bottle lol… no one be stupid enough to buy from here when we have great sources…
russianboy12
Subscriber
Absolutely, times are changing, and there is no one-size-fits-all approach. Running a smaller-scale lab while maintaining high product quality is completely valid. The size of an operation is a personal business decision, and for us, this model has worked exceptionally well for years.
Regarding promotions, they are generally standard practice in most industries. However, given the current challenges in sourcing raw materials, we have decided to pause any promotional offers for the time being. While I didn’t come across any specific rules prohibiting the distribution of free vials of testosterone, I did receive valuable feedback from long-standing members who explained why it could be seen as suspicious. Upon receiving that input, I immediately discontinued the practice.
Our goal is to earn the trust of the entire Meso community, not just a few individuals. We hope that through consistently providing high-quality products and top-tier customer service, our reputation will speak for itself. The support from Meso clients so far has been incredible, and we truly appreciate the trust placed in us.
Thank you to everyone for your feedback and continued support—we remain committed to doing things the right way.
accidentaljedi173
Member
You missed my entire point. Your nothing but red flag after red flag. You deserve zero trust from anyone.
FastBun
Member
you don’t even have flow hood… you need FLOW HOOD…. Thats the standard here… we already ran off coupe sources for not having one….your work area isn’t sterile!!!
Last edited:
Every time you post you prove my point. So you decided to show us the ladies lab? So the ladies get all the airborne particles in their gear and perhaps the men don’t with your much more impressive lab? Seriously, gtfoh. We’ve heard enough. You were asked to show your lab. You said you would and now you are the laughing stock of the underground. Now you’re defending yourself stating, wait that’s not the gentleman’s lab. Oh brother.
I guess when you were listing your equipment on the first page that was the ladies scale? Do you see how ridiculous this sounds? Especially after seeing what you call a lab
russianboy12
Subscriber
I think there's been a misunderstanding here. This is not a "lady's lab"—it is my one and only lab, and I take great pride in it, regardless of its size. The focus should be on the quality of the product, not just the scale of the operation.
It seems like there's been a disconnect in communication, and I’d rather clear things up than debate over minor details that may have been misinterpreted. My goal is to provide clarity and transparency, and I appreciate the opportunity to address any concerns.
I hope we can move forward in a positive direction, brother. Wishing you an amazing day, and I appreciate your patience as I recover from my surgery. Please bear with me, and I’ll do my best to stay on top of everything.
accidentaljedi173
Member
Both paragraphs imply that this setup was for the products you make for women. And, also that you have more equipment but it's next to house hold items. Assuming you have things in a kitchen, and you can see your toaster with some pop tarts cooking.
Similar threads
